Atlas Sound Stereo System SH Series User Manual

SH Series  
SH SERIES CLAMPING RACK SHELVES  
FEATURES  
• Designed to rack mount consumer electronics into standard Atlas Sound equipment racks  
• 3 vertical heights available, 2, 3, and 4RU  
• 2 depths @ 15" and 22" mounts most equipment  
• Sturdy 16 gauge construction with generous ventilation slots on the bottom and sides  
• Optional clamping brackets secures equipment from the top of the shelf  
• Optional rear rack rail support available for heavy equipment loads  
APPLICATION  
The new Atlas Sound clamping rack shelf systems are designed to rack mount consumer and  
"prosumer" electronics into standard Atlas Sound vertical equipment racks. Offering sturdy side,  
rear, top and side support, the Atlas Sound SH Series rack shelves will support VCRs, surround  
sound receivers, RF modulators, etc. Optional adjustable clamping brackets secure equipment  
from the top and include "L" brackets to provide a component stop from the rear. For heavier  
loads needing rear support, the Atlas Sound SHRSB bracket kits securely attach the SH shelf  
to the rear rack rail of your rack.  
SH15-2  
(w/o Accessories)  
MODEL  
SH15-2  
DESCRIPTION  
2 SP 15" Deep Rack Shelf  
SH15-3  
SH15-4  
SH22-2  
SH22-3  
SH22-4  
SHRSB2  
SHRSB3  
SHRSB4  
SHCK  
3 SP 15" Deep Rack Shelf  
4 SP 15" Deep Rack Shelf  
2 SP 22" Deep Rack Shelf  
3 SP 22" Deep Rack Shelf  
SH15-2  
(with optional SHRSB2  
and SHCK)  
4 SP 22" Deep Rack Shelf  
Optional 2 SP Rear Support Bracket for SH15-2 & SH22-2  
Optional 3 SP Rear Support Bracket for SH15-3 & SH22-3  
Optional 4 SP Rear Support Bracket for SH15-4 & SH22-4  
Optional Clamping Kit for All Models  
ARCHITECH AND ENGINEER SPECIFICATIONS  
Rack mount equipment tray shall be Atlas Sound SH Series Clamping rack shelf. Clamping  
shelf to be constructed of 16 gauge steel finished in black and in 3 standard EIA compliant  
heights (2, 3, and 4RU) and two depths measuring 15" and 22". Equipment ventilation slots  
shall located on the bottom rear portion and in each vertical side member. Wire lacing slots  
shall be located on the rear 90˚ vertical bend. Three optional rear support brackets shall be  
Atlas Sound SHRSB-2, -3, and -4. Optional equipment clamping kit shall be Atlas Sound model  
SHCK which shall fit all three models.  
SH22-3  
(w/o Accessories)  
SH22-3  
(with SHRSB3)  
Specifications subject to change without notice  
1601 JACK MCKAY BLVD. / ENNIS, TEXAS 75119 U.S.A.  
TELEPHONE: (800) 876-3333 / FAX (800) 765-3435  
AtlasSound.com  
435  
© 2006 Atlas Sound  
Printed in U.S.A.  
000106  
ATS002224 RevA 01/06  
SL10-2082  
 

3Com Conference Phone 900 0410 01 User Manual
3M Printer Accessories 740B30 User Manual
Agri Fab Spreader 45 0463 User Manual
Airflow Systems Carbon Monoxide Alarm IAQ50 User Manual
Allstar Products Group Paint Sprayer Paint Sprayer User Manual
American Standard Indoor Furnishings 0490011 User Manual
AMX Stereo Amplifier AVB DA RGBHV 0106 User Manual
AO Smith Water Heater AJH 1000A P User Manual
Avenview TV Converter Box VGA C5 Series User Manual
Beko Microwave Oven MWB 2510 EX User Manual