3Com Conference Phone 900 0410 01 User Manual

IP Conferencing Module  
Installation Guide  
3Com® Convergence Applications Suite  
VCX System Release 7.2  
http://www.3com.com/  
Part Number 900-0410-01  
Published October 2006  
 
ABOUT THIS GUIDE  
This section contains an overview of this guide, lists guide conventions,  
related documentation, and product compatibility.  
This guide describes how to answer the questions in the installation  
scripts, which run when you first start a 3Com® IP Conferencing Module  
Server. By providing the correct answers to the script questions, you  
configure the system for initial operation.  
This guide is intended for equipment installers who have a thorough  
understanding of telecommunications, VoIP technology, Linux operating  
systems, databases, networks, and system administrator privileges.  
Release Notes are issued with some products. If the information in the  
release notes differs from the information in this guide, follow the  
instructions in the release notes.  
Conventions  
This section describes notice, text, and figure conventions.  
Notices Table 1 lists notice icons.  
Table 1 Notice Icon Descriptions  
Icon  
Notice Type  
Description  
Information note  
Information that describes important features or  
instructions  
Caution  
Warning  
Information that alerts you to potential loss of  
data or potential damage to an application,  
system, or device  
Information that alerts you to potential personal  
injury  
 
       
6
ABOUT THIS GUIDE  
Text Table 2 lists text conventions.  
Table 2 Text Convention Descriptions  
Convention  
Description  
Screen displays  
This typeface represents information as it appears on the  
screen.  
Commands  
The word “command” means that you must enter the  
command exactly as shown and then press Return or  
Enter. Commands appear in bold. Example:  
To remove the IP address, enter the following  
command:  
SETDefault !0 -IP NETaddr = 0.0.0.0  
Words in italics  
Italics are used to:  
n
Emphasize a point.  
n
Denote a new term at the place where it is defined in  
the text.  
n
Identify menu names, menu commands, and software  
button names. Examples:  
From the Help menu, select Contents.  
Click OK.  
Related  
Documentation  
These 3Com documents contain additional information about the  
products in this release that are a part of or support the 3Com  
Convergence Applications Suite.  
The following documents are a part of the VCX IP Telephony Module:  
n
n
n
n
n
n
n
n
n
n
VCX Installation and Maintenance Guide  
VCX Administration Guide  
VCX Basic Telephone Quick Reference Guide  
VCX Business Telephone Quick Reference Guide  
VCX Manager’s Telephone Quick Reference Guide  
VCX Basic Telephone Guide  
VCX Business Telephone Guide  
VCX Manager’s Telephone Guide  
VCX Security Guide  
VCX Feature Codes for Analog Telephones Quick Reference Guide  
 
     
Comments  
7
The following documents are a part of the IP Messaging Module:  
n
n
n
n
n
n
n
IP Messaging Module Product Overview  
IP Messaging Module Quick Reference Guide - 3Com Native Interface  
IP Messaging Module User Guide - 3Com Native Interface  
IP Messaging Module Quick Reference Guide - Traditional Interface  
IP Messaging Module User Guide - Traditional Interface  
IP Messaging Module Operations and System Administration Guide  
E-Mail Reader Application Quick Start Guide  
The following documents are a part of the IP Conferencing Module:  
n
n
n
IP Conferencing Module Installation Guide  
IP Conferencing Module User Guide  
IP Conferencing Module Administration Guide  
The following documents provide information on products that support  
this release:  
n
n
n
n
n
n
n
n
n
Enterprise Management Suite User Guide  
Enterprise Management Suite Getting Started Guide  
V7111 Analog Media Gateway Fast Track Installation Guide  
V7111 Analog Media Gateway User Guide  
V6000 Analog Media Gateway Fast Track Installation Guide  
V6000 Analog Media Gateway User Guide  
V7122 Digital Media Gateway Fast Track Installation Guide  
V6100 Digital Media Gateway Fast Track Installation Guide  
V7122 and V6100 Digital Media Gateway User Guide  
Comments  
Send e-mail comments about this guide or about any Voice product  
documentation to:  
Include the following information with your comments:  
n
Document title  
n
Document part number (found on the front page)  
 
 
8
ABOUT THIS GUIDE  
n
n
Page number  
Your name and organization (optional)  
Example:  
IP Conferencing Module Installation Guide  
System Release 7.1  
Part Number 900-0353-01  
Page 25  
Please address all questions regarding 3Com software to your authorized  
3Com representative.  
 
PRE-INSTALLATION  
1
This chapter provides pre-installation guidelines for the 3Com IP  
Conferencing Module, which is an optional component of the 3Com  
VCX V7000 IP Telephony System.  
n
n
n
Configuration Options  
Gathering Site Information  
Worksheet  
Configuration  
Options  
This section describes sample hardware/software configurations that  
support the 3Com IP Conferencing Module.  
Three basic configurations are possible. The option you select depends on  
the number of hardware servers you have. A minimum of one and a  
maximum of twelve servers are supported.  
All hardware servers run the 3Com VCX Linux operating system.  
Definitions of these servers are contained in the 3Com price list.  
Option 1: Single If you only have one server, then all software components must be  
Server installed on it.  
Components installed on the single server:  
n
n
n
n
n
conference server/conference attendant server  
presence server (if purchased)  
VCX user database  
conferencing and presence database (master)  
web console server.  
 
             
10  
CHAPTER 1: PRE-INSTALLATION  
Figure 1 Network diagram - single server  
Conference server pool  
Conference server  
Presence server  
Master database  
User database  
Web server  
VCX or  
NBX server  
Option 2: Dual Server If you have two servers, configure the primary server as a “provisioning”  
server by installing the web console server, initial master database, VCX  
user database, presence server, and conference server on it. Configure  
the secondary server with the initial slave database and the conference  
server. The database pair (master and slave) provides redundancy, with  
the slave maintaining a copy of the master using MySQL database  
replication. In the event the slave cannot communicate with the master  
for ten minutes, switchover occurs. Note that both servers in a dual-server  
configuration can host conferences.  
Components installed on the primary server:  
n
n
n
n
n
conference server/conference attendant server  
presence server (if purchased)  
VCX user database  
conferencing and presence database (initial master)  
web console server.  
Components installed on the secondary server:  
n
conference server/conference attendant server  
conferencing and presence database (initial slave).  
n
 
   
Configuration Options  
11  
Figure 2 Network diagram - two servers  
Conference server pool  
Conference server  
Presence server  
Master database  
User database  
Web console  
Conference server  
Slave database  
Primary  
Server  
Secondary  
Server  
VCX or NBX server  
Both servers in the conference pool use their eth0 interface to connect to  
the network.  
Option 3: Multiple If you have between four and twelve servers, configure the primary server  
Servers (Four to as a “provisioning” server by installing the web console server, presence  
Twelve) server, master database, and VCX user database on it. Configure the  
secondary server with the initial slave database. The database pair (master  
and slave) provides redundancy. Configure all other servers in the pool  
with the conference server. Note that up to ten servers in a multi-server  
configuration can host conferences.  
Components installed on primary server:  
n
n
n
n
presence server (if purchased)  
VCX user database  
conferencing and presence database (initial master).  
web console server.  
Components installed on secondary server:  
conferencing and presence database (initial slave).  
n
Components installed on all other servers:  
conference server/conference attendant server.  
n
 
   
12  
CHAPTER 1: PRE-INSTALLATION  
Figure 3 Network diagram - multiple servers  
Conference server pool  
Conference  
server  
Conference  
server  
Conference  
server  
Conference  
server  
Presence server  
Master database  
User database  
Web server  
Conference  
server  
Slave database  
Primary  
Server  
Secondary  
Server  
VCX or NBX server  
All servers in the pool use their eth0 interface to connect to the network.  
Upgrades  
Following the initial implementation, the system can be upgraded in  
order to increase system capacity or provide database redundancy. For  
example, adding a second server to a single-server implementation will  
provide database redundancy.  
Upgrades can be performed at any time on fully operational systems.  
There is no need to disable any applications that are currently running  
when you add a new server.  
Post-installation After you run the installation script and assign a role to the servers in your  
Setup network, you need to configure the following:  
Setting up a Route to the Conference Servers  
You must configure the VCX dial plan with a route to your conference  
server pool. If your implementation has only one server, then a route to a  
single endpoint is required. If your implementation has multiple servers,  
then a route to multiple endpoints are required in order to provide  
redundancy.  
 
 
Gathering Site Information  
13  
Once the route is set up, the VCX system will forward conference calls to  
the designated endpoints—conference servers that provide a “routing”  
function by redirecting calls to ”hosting” conference servers. A single  
conference server can provide both routing and hosting functionality.  
Setting up a Route to the Conference Attendant Servers  
As with conference servers, it is necessary to configure a route for  
conference attendant servers. The VCX dial plan is used for this purpose.  
If you have only one server, then a route to a single endpoint is required.  
If you have multiple servers, then a route to at least two endpoints are  
required for redundancy.  
Test E-Mail Notification Setup  
You must test the e-mail setup by logging in to the system and sending  
an e-mail message using Send-only Simple Mail Transfer Protocol (sSMTP).  
If you fail to receive the test e-mail message, you can check for errors in  
/opt/logs/vcx-linux/maillog.  
Adding the Presence Server as a Trusted Host  
To enable presence to function properly, you must add the presence  
server to the VCX system as a trusted host.  
Gathering Site  
Information  
The 3Com VCX V7000 hardware servers communicate with each other  
using IP addresses. These addresses must be dedicated (static) and must  
be compatible with your network design.  
One or more 3Com IP Conferencing Module servers may be added to a  
VCX system.  
Using DNS 3Com recommends that you configure your DNS servers so that they  
know the IP addresses of all VCX servers and gateways. If you prefer to  
not use DNS, you can edit the /etc/hosts files on the IP Conferencing  
Module and all of the VCX servers.  
3Com does not support NIS or WINS as domain name resolution methods  
for VCX products.  
 
       
14  
CHAPTER 1: PRE-INSTALLATION  
Single Server If your network contains a single server, you require the following:  
n
You must dedicate one IP address to the 3Com IP Conferencing  
Module.  
n
n
n
You must assign a host name to the 3Com IP Conferencing Module.  
You must know the IP address of the network gateway.  
You must know the IP addresses of the primary and secondary DNS  
servers.  
n
You must know the IP addresses of the primary and secondary NTP  
servers.  
Dual Servers If your network contains two servers, you require the following:  
n
You must dedicate an IP address to each of the two 3Com IP  
Conferencing Modules.  
n
You must assign a unique host name to each of the two 3Com IP  
Conferencing Modules.  
Both servers must belong to the same domain.  
n
You must know the IP address of the network gateway.  
n
You must know the IP addresses of the primary and secondary DNS  
servers.  
n
You must know the IP addresses of the primary and secondary NTP  
servers.  
Multiple Servers If your network contains four to twelve servers, you require the following:  
(Four to Twelve)  
n
You must dedicate an IP address to each 3Com IP Conferencing  
Module in the network.  
n
You must assign a unique host name to each 3Com IP Conferencing  
Module in the network.  
All servers must belong to the same domain.  
n
You must know the IP address of the network gateway.  
n
You must know the IP addresses of the primary and secondary DNS  
servers.  
n
You must know the IP addresses of the primary and secondary NTP  
servers.  
 
     
Worksheet  
15  
Worksheet  
To make it easier to configure your system, you may want to have the  
necessary information in front of you before you begin to install any  
server.  
Table 3 Network Configuration Parameters  
Configuration Parameter  
3Com IP Conferencing Module IP address (eth0)  
3Com IP Conferencing Module host name  
Subnetwork mask  
Value  
Gateway IP address  
Primary DNS server IP address  
Secondary DNS server IP address  
DNS search path  
Primary NTP server IP address  
Secondary NTP server IP address  
Continent  
Country  
Time Zone  
Table 4 System Configuration Parameters  
Configuration Parameter  
Value  
Services:  
1. Presence and Conference - all in one  
2. Conferencing server  
3. Conferencing and database server  
4. Data server for presence and conferencing  
5. Presence server (with database)  
 
   
16  
CHAPTER 1: PRE-INSTALLATION  
Table 5 E-Mail Notification Parameters  
Configuration Parameter  
Mailhub (computer that handles mail)  
Hostname of your computer  
Mail name of your system  
Value  
System user e-mail address  
Table 6 Database Configuration Parameters  
Configuration Parameter  
Value  
Database:  
1. Local Master: this server will have the master db  
2. Local Slave: this server will have the slave db  
3. Remote database: db is on another server  
Table 7 Initial Configuration Parameters  
Configuration Parameter  
Domain name of organization  
Administrator’s e-mail address  
Activation key(s)  
Value  
Minimum value for numeric conference  
names  
Maximum value for numeric conference  
names  
Prefix for Ad Hoc conference names  
IP address of the primary dialout proxy  
IP address of the secondary dialout proxy  
Digit Map for DTMF dialout  
VCX server Site ID (enter on master only)  
VCX Server IP address (primary server: eth0)  
Username for VCX database synchronization  
Password for VCX database synchronization  
 
INSTALLATION SCRIPTS  
2
This chapter describes the initial configuration of each 3Com IP  
Conferencing Module server in a VCX system. All software components  
run on each server.  
The installation scripts are run on command. Each time a script prompts  
you for a response, you can accept the default (preconfigured) value by  
pressing the Return or Enter key, or you can manually enter a different  
value.  
If necessary, you can re-run the scripts and enter new values.  
Verify that all the procedures outlined in Chapter 1, “Pre-Installation”  
n
n
n
n
n
n
n
n
n
Multiple Server Initial Installation  
Post Installation Configuration  
Upgrade Installation  
Managing the Activation Keys  
Overview of  
Components  
This section provides a general description of the various components of  
the IP Conferencing Module.  
 
         
18  
CHAPTER 2: INSTALLATION SCRIPTS  
n
n
Web Provisioning Server — Allows for the creation of conferences and  
maintenance of the server.  
Conference Server — Allows SIP devices to join conferences that  
support any or all of audio, video, and desktop sharing  
communication modes.  
n
Conference Attendant — Allows users to join conferences by dialing a  
single access number independent of conference ID. The attendant  
prompts the user for the conference ID, and if required, the  
conference passcode.  
n
n
Presence Server — Collects and distributes the online status  
information of users.  
Conference and Presence Server Database — Database of IP  
Conferencing Module activity. On systems with two or more servers, a  
single database pair (master and slave) is supported.  
n
VCX user database — Database of VCX system users.  
Initial Installation -  
Services Installed  
When you perform an initial software installation (a “fresh” install), you  
must run the setup script for each hardware server in your conference  
server pool. The script provisions the following services on the hardware  
server:  
Network Configuration — For the initial installation, you are prompted  
to enter general networking settings.  
System Configuration — The script prompts you to select the  
configuration that matches the services you have purchased. Select one  
of the following:  
n
Presence and Conference (All-in-one): Installs all components,  
including the conference server, conference attendant server, web  
server, VCX user database, and conference & presence database.  
n
n
n
Conferencing server: Installs the conference server and conference  
attendant server.  
Conferencing and database server: Installs the conference server,  
conference attendant server, and conference & presence database.  
Data server for presence and conferencing: Installs the conference &  
presence database.  
 
                   
Initial Installation - Configuration Guidelines  
19  
n
Presence server (with database): Presence server, web server, VCX user  
database, and conference & presence database.  
E-Mail (sSMTP) Configuration — This portion of the script configures  
the Send-only Simple Mail Transfer Protocol (sSMTP) that enables the  
system to send e-mail notifications when conferences are created or  
modified, or when users add contacts to their buddy lists.  
Database Configuration — Select a database configuration for this  
server. Select “Local Master” if the server is going to host the master  
database (All-in-one server, or primary server in a distributed system).  
Select “Local Slave” if the server is going to host the slave database  
(secondary server in a distributed system). Select “Remote database” if  
the server is not going to host a database (all servers except the primary  
and secondary servers in a distributed system).  
IP Conferencing Module Configuration — Contains parameters for  
the VCX system software components, including the IP Conferencing  
Module. Activation keys are entered in this portion of the script.  
Initial Installation -  
Configuration  
Guidelines  
Follow these general guidelines when you perform an initial software  
installation. The installation varies depending on the number of servers  
you have (one, two, or more).  
Single Server Configuration  
General installation steps:  
1 On the single server, run the vcx-setup script:  
a When prompted to select the services the system will provide, select 1  
(presence and conference - all in one).  
b When prompted to select a database configuration, select 1 (Local  
Master: this server will have the master database).  
c When prompted to start the 3Com IP Conferencing Services, enter Y.  
2 Complete the post-installation configuration (see Post Installation  
Configuration).  
 
         
20  
CHAPTER 2: INSTALLATION SCRIPTS  
Dual Server Configuration  
General installation steps:  
1 On the primary server, run the vcx-setup script:  
a When prompted to select the services the system will provide, select 1  
(presence and conference - all in one).  
b When prompted to select a database configuration, select 1 (Local  
Master).  
c When prompted to start the 3Com IP Conferencing Services, enter Y.  
All services will start except DB_watchdog. It starts after the secondary  
server is installed and the database replication process is initiated.  
2 On the secondary server, run the vcx-setup script:  
a When prompted to select the services the system will provide, select 3  
(Conferencing and database server).  
b When prompted to select a database configuration, select 2 (Local  
Slave).  
c When the script asks whether you have run remote_access.sh, do the  
following:  
n
On the primary server, run remote_access.sh <secondary-server  
hostname | IP>  
d Return to the secondary server and enter Y at the prompt.  
e When prompted, enter the password of the primary (master) server.  
f When prompted to start the 3Com IP Conferencing Services, enter Y.  
3 Complete the post-installation configuration (see Post Installation  
Configuration).  
Multiple Server Configuration (Four to Twelve Servers)  
General installation steps:  
1 On the primary server, run the vcx-setup script:  
a When prompted to select the services the system will provide, select 5  
(Presence server with database).  
b When prompted to select a database configuration, select 1 (Local  
Master).  
c When prompted to start the 3Com IP Conferencing Services, enter Y.  
 
Initial Installation - Configuration Guidelines  
21  
All services will start except DB_watchdog. It starts after the secondary  
server is installed and the database replication process is initiated.  
2 On the secondary server, run the vcx-setup script:  
a When prompted to select the services the system will provide, select 4  
(Data server for presence and conferencing).  
b When prompted to select a database configuration, select 2 (Local  
Slave: this server will have a slave database).  
c When prompted, enter the hostname of the primary (master) server.  
d When the script asks whether you have run remote_access.sh, do the  
following:  
n
On the primary server, run remote_access.sh <secondary-server  
hostname | IP>  
e Return to the secondary server and enter Y at the prompt.  
f When prompted, enter the password of the primary (master) server.  
g When prompted to start the 3Com IP Conferencing Services, enter Y.  
3 On each of the conference servers (up to ten), run the vcx-setup script:  
a When prompted to select the services the system will provide, select 2  
(Conferencing server).  
b When prompted to select a database configuration, select 3 (Remote  
database: database is on another server).  
c When prompted, enter the hostname of the primary (master) server.  
d When the script asks whether you have run remote_access.sh, do the  
following:  
n
On the primary (master) server, run remote_access.sh  
<conference-server hostname | IP>  
n
On the secondary (slave) server, run remote_access.sh  
<conference-server hostname | IP>  
e Return to the conference server and enter Y at the prompt.  
f When prompted to start the 3Com IP Conferencing Services, enter Y.  
4 Complete the post-installation configuration (see Post Installation  
Configuration).  
Run the vcx-setup script only for “fresh” software installations where the  
VCX Linux server is not already running the IP Conferencing Module.  
 
22  
CHAPTER 2: INSTALLATION SCRIPTS  
When configuring the network parameters on the VCX Linux server,  
make sure you specify the fully qualified domain name for your system,  
not just the hostname. For example, use conf01.yourcompany.com not  
conf01.  
Use a local connection to the server to complete the initial software  
installation.  
The vcx-setup script is divided into five sections:  
n
n
n
n
n
network configuration  
system configuration  
e-mail configuration  
database configuration  
initial configuration.  
These sections run automatically after the command “vcx-setup” is  
entered.  
Single Server Initial  
Installation  
The section contains a sample script of the vcx-setup script for the single  
server (all-in-one) configuration).  
Sample vcx-setup The following options are selected in this sample script:  
Script (All-in-one  
n
All-in-one system configuration (installs the conference server,  
conference attendant server, web server, VCX user database, and  
conference & presence database)  
server)  
n
Master database configuration.  
The vcx-setup script displays the current settings and then asks you if you  
want to accept or update them. Sample answers are provided in bold  
type along with explanations of those answers. Explanations are in italics.  
To run the vcx-setup script:  
1 Log in to the server as root.  
2 Enter a password (default is pvadmin).  
3 Press Enter (or Return).  
-bash-2.05b# vcx-setup  
 
     
Single Server Initial Installation  
23  
Enter vcx-setup at the command prompt.  
---------------------------------------------------------------------------  
---------- Welcome to the VCX Linux Network Configuration Wizard ----------  
---------------------------------------------------------------------------  
This wizard sets up networking and related services.  
Start of Network Configuration  
Configure networking now? [yes] :  
Press the Enter or Return key to accept yes as the suggested answer.  
--------- Configuring Dynamic Host Configuration Protocol (DHCP) ----------  
VCX servers can use DHCP for automated configuration, but this requires  
that the DHCP server is configured to provide the proper options. Unless  
you know that your environment is set up in this way, you should say 'no'  
here and configure static network parameters.  
Use DHCP on eth0 to configure network parameters? [no] :  
---------- Configuring Hostname ----------  
Enter system hostname [localhost] : conf01.yourcompany.com  
---------- Configuring IP Interface 'eth0' ----------  
Enter IP Address  
Enter Network Subnet Mask  
[192.168.1.100 ] : 10.20.30.60  
[255.255.255.0 ] : 255.255.255.0  
Enter Default Gateway Address [10.20.30.254 ] : 10.20.30.254  
---------- Configuring IP Interface 'eth1' ----------  
Interface State  
: disabled  
Note that ‘eth1’ is not used for the 3Com IP Conferencing Module.  
---------- Configuring DNS Servers ----------  
Enter DNS servers one at a time.  
When done, enter 0.0.0.0 to stop.  
Primary DNS Server [192.168.1.1] : 10.25.10.31  
Secondary DNS Server [192.168.1.2] : 10.26.10.31  
Tertiary DNS Server [0.0.0.0] : 0.0.0.0  
---------- Configuring DNS Search Path ----------  
Press Enter to leave the current path unchanged, or specify  
a new search path, with spaces separating each entry.  
DNS Search Path []: yourcompany.com  
 
 
24  
CHAPTER 2: INSTALLATION SCRIPTS  
---------- Configuring Network Time Protocol ----------  
Enter NTP servers one at a time.  
When done, enter 0.0.0.0 to stop.  
Primary NTP Server [192.168.1.253] : 10.35.10.51  
Secondary NTP Server [192.168.1.252] : 10.36.10.51  
Additional NTP Server : 10.1.0.3  
-------------------------- Configuring Time Zone --------------------------  
Please select a geographic location from the following list:  
1. Africa  
2. Americas  
3. Antarctica  
4. Arctic Ocean  
5. Asia  
6. Atlantic Ocean  
7. Australia  
8. Europe  
9. Indian Ocean  
10. Pacific Ocean  
Enter continent [2] :  
Press the Enter or Return key to accept 2 as the suggested answer.  
Please select a country from the following list:  
1. Antigua & Barbuda  
2. Anguilla  
18. Ecuador  
19. Grenada  
35. Panama  
36. Peru  
3. Netherlands Antilles 20. French Guiana  
37. St Pierre & Miquelon  
38. Puerto Rico  
39. Paraguay  
4. Argentina  
5. Aruba  
6. Barbados  
7. Bolivia  
21. Greenland  
22. Guadeloupe  
23. Guatemala  
24. Guyana  
40. Suriname  
41. El Salvador  
42. Turks & Caicos Is  
43. Trinidad & Tobago  
44. United States  
45. Uruguay  
46. St Vincent  
47. Venezuela  
48. Virgin Islands (UK)  
49. Virgin Islands (US)  
8. Brazil  
9. Bahamas  
25. Honduras  
26. Haiti  
10. Belize  
27. Jamaica  
11. Canada  
12. Chile  
28. St Kitts & Nevis  
29. Cayman Islands  
30. St Lucia  
31. Martinique  
32. Montserrat  
33. Mexico  
13. Colombia  
14. Costa Rica  
15. Cuba  
16. Dominica  
17. Dominican Republic  
Enter country [44] :  
34. Nicaragua  
Press the Enter or Return key to accept 44 as the suggested answer.  
 
Single Server Initial Installation  
25  
Please select a time zone from the following list:  
1. Alaska Time  
2. Alaska Time - Alaska panhandle  
3. Alaska Time - Alaska panhandle neck  
4. Alaska Time - west Alaska  
5. Aleutian Islands  
6. Central Time  
7. Central Time - Michigan - Wisconsin border  
8. Central Time - North Dakota - Oliver County  
9. Eastern Standard Time - Indiana - Crawford County  
10. Eastern Standard Time - Indiana - Starke County  
11. Eastern Standard Time - Indiana - Switzerland County  
12. Eastern Standard Time - Indiana - most locations  
13. Eastern Time  
14. Eastern Time - Kentucky - Louisville area  
15. Eastern Time - Kentucky - Wayne County  
16. Eastern Time - Michigan - most locations  
17. Hawaii  
18. Mountain Standard Time - Arizona  
19. Mountain Time  
20. Mountain Time - Navajo  
21. Mountain Time - south Idaho & east Oregon  
22. Pacific Time  
Enter zone [13] :  
Selected Time Zone:  
America/New_York  
-------------------------- CONFIGURATION SUMMARY --------------------------  
DHCP state: disabled  
Hostname: conf01.yourcompany.com  
IP Interfaces: Device  
IP Address  
10.20.30.60  
(interface is disabled)  
Network Mask  
255.255.0.0  
Default Gateway  
10.20.30.254  
eth0  
eth1  
DNS Servers:  
10.25.10.31  
10.26.10.31  
Search Domains:yourcompany.com  
NTP Servers:  
10.35.10.51  
10.36.10.51  
10.1.0.3  
Time Zone:  
America/New_York  
---------------------------------------------------------------------------  
 
26  
CHAPTER 2: INSTALLATION SCRIPTS  
Is all of the above information correct? [yes] :  
---------------------------------------------------------------------------  
---------------------------------------------------------------------------  
Please wait while the wizard completes.  
Saving configuration...Done.  
End of Network Configuration  
The network configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-config-network -wizard.  
Start of System Configuration  
After successful completion of the network configuration, the script will  
prompt you to select a set of services.  
----------------------- Select System Configuration -----------------------  
Individual systems may provide various services in a VCX installation.You  
must select the appropriate set of services which this system is to  
provide. Be certain that the selection corresponds to the functionality  
you have purchased.  
Which services will this system provide?  
1. Presence and Conference - all in one  
2. Conferencing server  
3. Conferencing and database server  
4. Data server for presence and conferencing  
5. Presence server (with database)  
Enter your choice (1-5) : 1  
Select “1” to install the following components:  
- conference server  
- conference attendant server  
- presence server  
- web server  
- VCX user database  
- conference & presence database.  
 
 
Single Server Initial Installation  
27  
You have chosen to configure this system to provide:  
Presence and Conference - all in one  
Note that in order for these services to work, you must have purchased an  
appropriate license and installed the corresponding license activation key  
on this system.  
*** WARNING *** Once you confirm your selection, you cannot change it.  
Are you absolutely certain that you wish to configure this system as an  
'Presence and Conference - all in one' server?If you answer 'no' here you  
can choose an alternative configuration.  
Confirm selection? [no] : y  
Confirm your selection by typing “y.”  
Selection confirmed.  
*** Assembling VCX.2.9.3 using 'VSBOM.xml' ***  
*** Processing components ***  
*** Executing assembly commands ***  
*** Assembly complete ***  
The VCX assembly has been created. Preparing system for use:  
Performing early startup tasks: [ OK ]  
Starting VCX-Firewall: [ OK ]  
Starting httpd:  
Removing unneeded application components from the system.  
This may take several minutes. Please wait while the operation completes.  
Determining which packages are not used by any VCX version:  
oem.7.0.1  
presconf.2.5.3  
presconf-conf.2.5.3  
presconf-presence.2.5.3  
presconf-vcxdb.2.5.3  
presconf-web.2.5.3  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
 
28  
CHAPTER 2: INSTALLATION SCRIPTS  
vcx-firewall.1.5.5  
mysql.3.23.58  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
No extra packages were found.  
End of System Configuration  
The system configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-setconfigtype.  
Start of E-mail (sSMTP) Configuration  
After successful completion of the system configuration, the script will  
prompt you to set up the e-mail notification utility. The utility sends  
e-mails when conferences are created and modified, and when users  
attempt to add contacts to their buddy lists. E-mail notification works  
once users have added their e-mail addresses to the 3Com IP  
Conferencing Module.  
Configuration for sSMTP  
(1) mailhub  
This is the computer responsible for handling your outgoing mail. It could be the  
SMTP server of your ISP, or a departmental mailhub. Use the fully-qualified domain  
name (foo.bar.baz) of the mailhub; if it uses an unusual SMTP port number, use the  
colon syntax  
foo.bar.baz:2525  
Otherwise sSMTP will use the standard SMTP port number (25).  
(Note that sSMTP can support a user-dependent mailhub with the 'reverse aliases'  
feature, for which see the man page.)  
Please enter your mailhub []: mail.yourcompany.com  
Enter the fully qualified domain name of the computer handling outgoing  
mail.  
(2) FromLineOverride  
This specifies how sSMTP handles the From: line of outgoing mail. If  
FromLineOverride=YES, sSMTP will leave the From: line alone if it already exists.  
If FromLineOverride has any other value, or there is no From: line, sSMTP creates  
the From: line using your username (or the -f command-line option), and the value of  
the rewriteDomain option (step (4), below). If you use a mail user agent (MUA; e.g.  
mutt, pine) I recommend using YES and having the MUA set the From: line.  
(Exception: the 'reverse aliases' feature can be used to set up a particular From:  
 
 
Single Server Initial Installation  
29  
address for each user, in which case don't use FromLineOverride=YES. See the man  
page.)  
FromLineOverride? [YES]:  
Specify how sSMTP handles the From: line of outgoing mail.  
(3) hostname  
sSMTP uses the hostname of your computer to identify itself to the mailhub, and in  
the Received: headers of the outgoing mail. This has relatively little effect on how  
the mail is handled. Use the fully-qualified domain name (FQDN) of your  
computer(foo.bar.baz). If it doesn't have a FQDN, use some name for your box.  
Hostname of your box [conf01.yourcompany.com]:  
Enter the host name of your computer handling outgoing mail.  
(4) rewriteDomain  
Please enter the mail name of your system.  
sSMTP uses this value to add a domain to unqualified e-mail addresses(addresses  
without an @-sign).  
You probably want to use the domain from your own e-mail address.You probably want  
to set up your MUA to handle unqualified addresses itself, in which case sSMTP will  
never have to use this.  
Mail name [conf01.yourcompany.com]:yourcompany.com  
Enter the mail name of your system.  
(5) root  
Last and least: if sSMTP finds an unqualified e-mail address among the recipients,  
and it corresponds to a username on your local machine with a userid less than 1000,  
then the e-mail is sent to this value instead. The idea is that mail sent to 'root'  
should probably go to 'postmaster' instead.  
If you set up your MUA to do its own handling of unqualified  
addresses, this is irrelevant. Use the default value of 'postmaster' or your own  
e-mail address if you're paranoid.  
System users receive mail at [postmaster]:postmaster  
Enter the system user e-mail address.  
Note: check with your e-mail administrator for the proper system user  
e-mail address.  
Wrote configuration file /etc/ssmtp/ssmtp.conf  
Starting mysqld daemon with databases from /opt/3comdata/mysql  
 
30  
CHAPTER 2: INSTALLATION SCRIPTS  
Tcl is already installed  
Tcl version is 8.3  
Please report any installation problem to  
"3Com Support" <[email protected]>  
End of E-mail (sSMTP) Configuration  
The e-mail configuration is complete. If necessary, you can re-run this  
portion of the script by entering usr/sbin/smtp-configure.  
Start of Database Configuration  
After successful completion of the e-mail configuration, the script will  
prompt you to select a database configuration.  
There are different ways to install and access the database.  
1 Local Master: this server will have the master database.  
2 Local Slave: this server will have a slave database.  
3 Remote database: database is on another server.  
Please choose one of the above options: 1  
Select “1” to specify that this server will initially host the master database  
(All-in-one server, or primary server in a distributed system).  
Available applications: sipconf,sipvxml,gui,vcxdb,sippeng,  
End of Database Configuration  
The database configuration is complete. If necessary, you can re-run this  
portion of the script by entering presconf-setup.  
Start of IP Conferencing Module Configuration  
After successful completion of the database configuration, the script will  
prompt you to select an initial configuration.  
Enter the fully qualified hostname for this installation.  
[host.yourcompany.com]:  
Enter the fully qualified hostname of the machine you are installing on.  
Assuming the userid of the administrator who will manage the  
applications for your domain is root  
 
   
Single Server Initial Installation  
31  
Enter the administrator's email address. [[email protected]]:  
Assuming default value as [email protected]  
Enter the administrator’s e-mail address. The default is derived from the  
hostname defined in the network configuration (above).  
If the system is configured to send e-mail notification of conference  
events to users, the e-mails will appear to be sent from the administrator  
(sipadmin@yourcompany.com). Note that some mail agents may require  
this to be a valid e-mail address.  
Host Identifier (hostid) of this machine is: 75896dc20fa90922ddbb2b81  
Please send an email to [email protected] to receive an activation key to activate  
this product.  
Please enter the software activation keys one by one; end with an empty line:  
Send the host ID to 3Com, which will use it to generate your activation  
keys. Once 3Com has returned the activation keys to you, you can paste  
them into the install session when prompted.  
The activation keys are validated as they are entered. If validation is  
successful, the keys will be stored in a license file and the installation  
session will continue. If validation is unsuccessful, the installation session  
will be aborted.  
Enter key:  
sipconf:-:+:2006-11-11:2006-11-11:300-300-1-1-1:124b4835f1a6e9a172f4ba6596fe1f85  
key ok for sipconf  
Enter key: sipvxml:-:+:2006-11-11:2006-11-11:50-50:b4acb4c5415c8005d0b8bd737f8a1d5b  
key ok for sipvxml  
Enter key: sippeng:-:+:2006-11-11:2006-11-11:-:dcdb0531a90ffbf027786aa0a4732a98  
key ok for sippeng  
Enter key:  
License file name: /opt/3com/components/presconf.2.5.3/presconf_licenses  
Validating the license for sipconf application ...  
The license key  
sipconf:-:+:2006-11-11:2006-11-11:300-300-1-1-1:124b4835f1a6e9a172f4ba6596fe1f85 is  
valid  
Validating the license for sipvxml application ...  
The license key  
sipvxml:-:+:2006-11-11:2006-11-11:50-50:b4acb4c5415c8005d0b8bd737f8a1d5b is valid  
Validating the license for sippeng application ...  
 
32  
CHAPTER 2: INSTALLATION SCRIPTS  
The license key  
sippeng:-:+:2006-11-11:2006-11-11:-:dcdb0531a90ffbf027786aa0a4732a98 is valid  
MySQL is needed for your application.  
mysql is found at /opt/3com/VCX/bin/mysql  
Assuming mysql is already installed  
Enter the mysql user name for accessing the master database.[root]:  
Assuming default value as root  
Enter the host name on which the master database is running. [localhost]:  
Assuming default value as localhost  
Enter the mysql password for user root at localhost. [NULL]:  
Assuming default value as NULL  
The SIP conferencing server will be running at conf01.yourcompany.com:5060  
The Conference Attendant Server will be running at conf01.yourcompany.com:5092  
The range of the numeric conference names must be specified  
Enter the minimum value for numeric conference names. [8000]:  
Enter the minimum value for numeric conference names. Default is 8000.  
Enter the maximum value for numeric conference names. Note that  
it must have the same number of digits as the minimum value. :  
Enter the maximum value for numeric conference names.  
For conference server, the prefix of ad hoc conference can be specified  
Enter the prefix for ad hoc conference. [2join]:  
Enter the prefix for ad hoc conferences.  
Enter the IP address of the primary dialout proxy:  
Value entered by user is: 10.1.15.5  
Enter the IP address of the primary VCX system used for DTMF dialout  
during conferences.  
Enter the IP address of the secondary dialout proxy:  
Assuming default value as  
Enter the IP address of the secondary VCX system used for DTMF dialout  
during conferences.  
 
Single Server Initial Installation  
33  
Enter the digitmap for DTMF dialout.[[1-7]XX|9XXXXXXXXXX|91XXXXXXXXX|9011.XT]:  
Assuming default value as [1-7]XX|9XXXXXXXXXX|91XXXXXXXXX|9011.XT  
Enter the digit map used to define the dial plan for DTMF dialout.  
Several lines of text appear before the next prompt.  
-- Creating cinema_db.conf  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.2.2.190  
to 755.  
-- Trying to load fbsql.so...  
-- fbsql is loaded...  
-- Opening the database sql://root:NULL@localhost/mysql  
-- Changing permissions for conf01.yourcompany.com  
-- Changing permissions for localhost  
-- Changing permissions for conf01.yourcompany.com  
-- Changing permissions for conf01.yourcompany.com  
-- Changing permissions for conf01.yourcompany.com  
-- Flushing privleges  
-- Calling createdb  
*** Checking table vxml_users ***  
Creating table vxml_users  
*** Checking table put ***  
Creating table put  
*** Checking table aliases ***  
Creating table aliases  
*** Checking table about ***  
Creating table about  
*** Checking table requestlog ***  
Creating table requestlog  
*** Checking table gwclass ***  
Creating table gwclass  
*** Checking table debug_config ***  
Creating table debug_config  
*** Checking table personnote ***  
Creating table personnote  
*** Checking table confatt_record ***  
Creating table confatt_record  
*** Checking table dialplan ***  
Creating table dialplan  
*** Checking table radius_config ***  
Creating table radius_config  
Cannot select database sip: Error 1049 (Unknown database 'sip')  
*** Checking table display ***  
Creating table display  
*** Checking table domain ***  
 
34  
CHAPTER 2: INSTALLATION SCRIPTS  
Creating table domain  
*** Checking table sipd_log ***  
Creating table sipd_log  
*** Checking table conferences ***  
Creating table conferences  
*** Checking table eventattendee ***  
Creating table eventattendee  
*** Checking table user_config ***  
Creating table user_config  
*** Checking table cinema ***  
Creating table cinema  
*** Checking table address ***  
Creating table address  
*** Checking table confinstances ***  
Creating table confinstances  
*** Checking table person ***  
Creating table person  
*** Checking table conf_log ***  
Creating table conf_log  
*** Checking table agendaitem ***  
Creating table agendaitem  
*** Checking table Rooms ***  
Creating table Rooms  
*** Checking table resource ***  
Creating table resource  
*** Checking table conffiles ***  
Creating table conffiles  
*** Checking table event ***  
Creating table event  
*** Checking table acl ***  
Creating table acl  
*** Checking table license ***  
Creating table license  
*** Checking table vote ***  
Creating table vote  
*** Checking table presence_conf ***  
Creating table presence_conf  
*** Checking table eventresource ***  
Creating table eventresource  
*** Checking table speed_dial ***  
Creating table speed_dial  
*** Checking table vcxdb_conf ***  
Creating table vcxdb_conf  
*** Checking table RoomACL ***  
Creating table RoomACL  
*** Checking table Cards ***  
 
Single Server Initial Installation  
35  
Creating table Cards  
*** Checking table groupmember ***  
Creating table groupmember  
*** Checking table subscription ***  
Creating table subscription  
*** Checking table messageboard ***  
Creating table messageboard  
*** Checking table confsrv_config ***  
Creating table confsrv_config  
*** Checking table ua_capabilities ***  
Creating table ua_capabilities  
*** Checking table trusted_host ***  
Creating table trusted_host  
*** Checking table vmail ***  
Creating table vmail  
*** Checking table tariff ***  
Creating table tariff  
*** Checking table RoomPrefs ***  
Creating table RoomPrefs  
*** Checking table contacts ***  
Creating table contacts  
*** Checking table ConfigData ***  
Creating table ConfigData  
*** Checking table confservers ***  
Creating table confservers  
*** Checking table eventcategory ***  
Creating table eventcategory  
*** Checking table user_presence ***  
Creating table user_presence  
*** Checking table location_tuples ***  
Creating table location_tuples  
*** Checking table Credentials ***  
Creating table Credentials  
*** Checking table mail_account ***  
Creating table mail_account  
*** Checking table eventgroup ***  
Creating table eventgroup  
*** Checking table eventgroup_notify ***  
Creating table eventgroup_notify  
*** Checking table gateway_map ***  
Creating table gateway_map  
*** Checking table confusers ***  
Creating table confusers  
*** Checking table thirdparty ***  
Creating table thirdparty  
*** Checking table election ***  
 
36  
CHAPTER 2: INSTALLATION SCRIPTS  
Creating table election  
*** Checking table persongroup ***  
Creating table persongroup  
*** Checking table sipd_config ***  
Creating table sipd_config  
*** Checking table ssl_config ***  
Creating table ssl_config  
-- createdb is complete  
-- *IMPORTANT*: Adding administrator [email protected] with password root  
-- Database is successfully initialized.  
MYSQL host is localhost  
MYSQL user is root  
Enter the IP address of the VCX Data Server: 10.20.30.40  
Enter the IP address of the VCX data server that contains the global  
directory of users to be downloaded to this IP Conferencing Module.  
Enter the username for VCX DB Sync: vcx  
Enter the username for VCX database synchronization.  
Enter the password for VCX DB Sync: vcx  
Enter the password for VCX database synchronization. The password  
does not echo on the screen.  
Do users on this VCX have their home presence server on this installation (y/n)?[y]:  
Assuming the default value as y  
Enter no [n] if the VCX data server containing the global directory of users  
(see above) is not a local VCX for this installation.  
# 10.20.30.40 SSH-1.99-OpenSSH_3.6.1p2  
# 10.20.30.40 SSH-1.99-OpenSSH_3.6.1p2  
OK  
now testing if we can connect to the 10.20.30.40  
vcx  
updating the configuration database entries  
3Com IP Conferencing Module applications will be automatically restarted when  
system reboots  
-- Installing SIP Conferencing servers ...  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.5.3.  
-- Changing owner and permissions of  
/opt/3com/components/presconf.2.5.3/sipconf/sipconf.  
 
Single Server Initial Installation  
37  
restarting httpd...  
Creating a directory client_config to hold the soft client  
autoconfiguration files...  
Directory created successfully at  
/opt/3com/components/presconf.2.5.3/client_config  
Any files that you store in this directory are accessible via  
http://master.yourcompany.com/3c3/<CONFIGFILENAME>.xml  
If you have not already entered the license string during installation  
you must do so from the web interface before trying to run any  
application in 3Com software.  
You may start, stop and monitor the 3Com IP Conferencing Module applications using  
the following command(s):  
> service <application> start|stop|status|restart  
Else, you may do so using the web interface.  
Your installation is complete.  
To add new user or to change your profile visit appropriate  
URL corresponding to /opt/3com/components/presconf.2.5.3/gui.  
Once again, Please report any installation problem to  
"3Com Support" <[email protected]>  
****************************************************  
* Output, from this install session, was saved to:  
* /opt/3com/components/presconf.2.5.3/install_log.Dec_07_2005  
****************************************************  
Would you like to start the 3Com IP Conferencing Module services now?  
(N/Y) [N]: y  
Select “Y” to complete the installation and start the 3Com IP  
Conferencing Module services. Select “N” (the default) to complete the  
installation but not start the services.  
Validating configuration file  
Configuration file is valid for this release.  
Applying configuration to all unconfigured components  
Configuring VCX components:  
Configuring vcx-firewall-firstboot: [ OK ]  
Configured VCX components: 1 configured.  
Component configuration succeeded.  
 
38  
CHAPTER 2: INSTALLATION SCRIPTS  
Stopping VCX-Firewall: [ OK ]  
Starting VCX-Firewall: [ OK ]  
Starting VCX Services:  
Starting vcx/mysql: [ OK ]  
Starting vcx/confbridge: [ OK ]  
Starting vcx/sipconf: [ OK ]  
Starting vcx/sippeng: [ OK ]  
Starting vcx/vcxdb: [ OK ]  
Started VCX Services: 5 started.  
-bash-2.05b#  
End of IP Conferencing Module Configuration  
Following successful completion of the script, the 3Com IP Conferencing  
Module services will be installed. Start the services using a script  
Dual Server Initial  
Installation  
This section contains sample scripts for the dual server configuration. Two  
samples are provided:  
n
Sample vcx-setup Script (Primary server)  
Sample vcx-setup Script (Secondary server)  
n
Sample vcx-setup This script programs the primary server in a dual server configuration. The  
Script (Primary master database is installed and initially hosted on the primary server.  
server)  
The following options are selected in this sample script:  
n
n
Presence server configuration (installs the presence server, web server,  
VCX system database, and conference & presence database)  
Master database configuration.  
 
     
Dual Server Initial Installation  
39  
The vcx-setup script displays the current settings and then asks you if you  
want to accept or update them. Sample answers are provided in bold  
type along with explanations of those answers. Explanations are in italics.  
To run the vcx-setup script:  
1 Log in to the server as root.  
2 Enter a password (default is pvadmin).  
3 Press Enter (or Return).  
-bash-2.05b# vcx-setup  
Enter vcx-setup at the command prompt.  
---------------------------------------------------------------------------  
---------- Welcome to the VCX Linux Network Configuration Wizard ----------  
---------------------------------------------------------------------------  
This wizard sets up networking and related services.  
Start of Network Configuration  
Configure networking now? [yes] :  
Press the Enter or Return key to accept yes as the suggested answer.  
--------- Configuring Dynamic Host Configuration Protocol (DHCP) ----------  
VCX servers can use DHCP for automated configuration, but this requires  
that the DHCP server is configured to provide the proper options. Unless  
you know that your environment is set up in this way, you should say 'no'  
here and configure static network parameters.  
Use DHCP on eth0 to configure network parameters? [no] :  
---------- Configuring Hostname ----------  
Enter system hostname [localhost] : master.yourcompany.com  
---------- Configuring IP Interface 'eth0' ----------  
Enter IP Address  
Enter Network Subnet Mask  
[192.168.1.100 ] : 10.20.30.60  
[255.255.255.0 ] : 255.255.255.0  
Enter Default Gateway Address [10.20.30.254 ] : 10.20.30.254  
---------- Configuring IP Interface 'eth1' ----------  
Interface State  
: disabled  
Note that ‘eth1’ is not used for the 3Com IP Conferencing Module.  
---------- Configuring DNS Servers ----------  
 
 
40  
CHAPTER 2: INSTALLATION SCRIPTS  
Enter DNS servers one at a time.  
When done, enter 0.0.0.0 to stop.  
Primary DNS Server [192.168.1.1] : 10.25.10.31  
Secondary DNS Server [192.168.1.2] : 10.26.10.31  
Tertiary DNS Server [0.0.0.0] : 0.0.0.0  
---------- Configuring DNS Search Path ----------  
Press Enter to leave the current path unchanged, or specify  
a new search path, with spaces separating each entry.  
DNS Search Path []: yourcompany.com  
---------- Configuring Network Time Protocol ----------  
Enter NTP servers one at a time.  
When done, enter 0.0.0.0 to stop.  
Primary NTP Server [192.168.1.253] : 10.35.10.51  
Secondary NTP Server [192.168.1.252] : 10.36.10.51  
Additional NTP Server : 10.1.0.3  
-------------------------- Configuring Time Zone --------------------------  
Please select a geographic location from the following list:  
1. Africa  
2. Americas  
3. Antarctica  
4. Arctic Ocean  
5. Asia  
6. Atlantic Ocean  
7. Australia  
8. Europe  
9. Indian Ocean  
10. Pacific Ocean  
Enter continent [2] :  
Press the Enter or Return key to accept 2 as the suggested answer.  
Please select a country from the following list:  
1. Antigua & Barbuda  
2. Anguilla  
18. Ecuador  
19. Grenada  
35. Panama  
36. Peru  
3. Netherlands Antilles 20. French Guiana  
37. St Pierre & Miquelon  
38. Puerto Rico  
39. Paraguay  
4. Argentina  
5. Aruba  
6. Barbados  
7. Bolivia  
8. Brazil  
21. Greenland  
22. Guadeloupe  
23. Guatemala  
24. Guyana  
25. Honduras  
26. Haiti  
40. Suriname  
41. El Salvador  
42. Turks & Caicos Is  
43. Trinidad & Tobago  
9. Bahamas  
 
Dual Server Initial Installation  
41  
10. Belize  
11. Canada  
12. Chile  
13. Colombia  
14. Costa Rica  
15. Cuba  
16. Dominica  
17. Dominican Republic  
Enter country [44] :  
27. Jamaica  
44. United States  
45. Uruguay  
46. St Vincent  
47. Venezuela  
48. Virgin Islands (UK)  
49. Virgin Islands (US)  
28. St Kitts & Nevis  
29. Cayman Islands  
30. St Lucia  
31. Martinique  
32. Montserrat  
33. Mexico  
34. Nicaragua  
Press the Enter or Return key to accept 44 as the suggested answer.  
Please select a time zone from the following list:  
1. Alaska Time  
2. Alaska Time - Alaska panhandle  
3. Alaska Time - Alaska panhandle neck  
4. Alaska Time - west Alaska  
5. Aleutian Islands  
6. Central Time  
7. Central Time - Michigan - Wisconsin border  
8. Central Time - North Dakota - Oliver County  
9. Eastern Standard Time - Indiana - Crawford County  
10. Eastern Standard Time - Indiana - Starke County  
11. Eastern Standard Time - Indiana - Switzerland County  
12. Eastern Standard Time - Indiana - most locations  
13. Eastern Time  
14. Eastern Time - Kentucky - Louisville area  
15. Eastern Time - Kentucky - Wayne County  
16. Eastern Time - Michigan - most locations  
17. Hawaii  
18. Mountain Standard Time - Arizona  
19. Mountain Time  
20. Mountain Time - Navajo  
21. Mountain Time - south Idaho & east Oregon  
22. Pacific Time  
Enter zone [13] :  
Selected Time Zone:  
America/New_York  
-------------------------- CONFIGURATION SUMMARY --------------------------  
DHCP state: disabled  
Hostname: master.yourcompany.com  
IP Interfaces: Device  
IP Address  
10.20.30.60  
(interface is disabled)  
Network Mask  
255.255.0.0  
Default Gateway  
10.20.30.254  
eth0  
eth1  
 
42  
CHAPTER 2: INSTALLATION SCRIPTS  
DNS Servers:  
10.25.10.31  
10.26.10.31  
Search Domains:yourcompany.com  
NTP Servers:  
10.35.10.51  
10.36.10.51  
10.1.0.3  
Time Zone:  
America/New_York  
---------------------------------------------------------------------------  
Is all of the above information correct? [yes] :  
---------------------------------------------------------------------------  
---------------------------------------------------------------------------  
Please wait while the wizard completes.  
Saving configuration...Done.  
End of Network Configuration  
The network configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-config-network -wizard.  
Start of System Configuration  
After successful completion of the network configuration, the script will  
prompt you to select a set of services.  
----------------------- Select System Configuration -----------------------  
Individual systems may provide various services in a VCX installation.You  
must select the appropriate set of services which this system is to  
provide. Be certain that the selection corresponds to the functionality  
you have purchased.  
Which services will this system provide?  
1. Presence and Conference - all in one  
2. Conferencing server  
3. Conferencing and database server  
4. Data server for presence and conferencing  
5. Presence server (with database)  
Enter your choice (1-5) : 1  
 
 
Dual Server Initial Installation  
43  
Select “1” to install the following components:  
- conference server  
- conference attendant server  
- presence server  
- web server  
- VCX user database  
- conference & presence database.  
You have chosen to configure this system to provide:  
Presence and Conference - all in one  
Note that in order for these services to work, you must have purchased an  
appropriate license and installed the corresponding license activation key  
on this system.  
*** WARNING *** Once you confirm your selection, you cannot change it.  
Are you absolutely certain that you wish to configure this system as an  
'Presence and Conference - all in one' server?If you answer 'no' here you  
can choose an alternative configuration.  
Confirm selection? [no] : y  
Confirm your selection by typing “y.”  
Selection confirmed.  
*** Assembling VCX.2.9.3 using 'VSBOM.xml' ***  
*** Processing components ***  
*** Executing assembly commands ***  
*** Assembly complete ***  
The VCX assembly has been created. Preparing system for use:  
Performing early startup tasks: [ OK ]  
Starting VCX-Firewall: [ OK ]  
Starting httpd:  
 
44  
CHAPTER 2: INSTALLATION SCRIPTS  
Removing unneeded application components from the system.  
This may take several minutes. Please wait while the operation completes.  
Determining which packages are not used by any VCX version:  
oem.7.0.1  
presconf.2.5.3  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
: [keep; used in 2.9.3]  
presconf-conf.2.5.3  
presconf-presence.2.5.3  
presconf-vcxdb.2.5.3  
presconf-web.2.5.3  
vcx-firewall.1.5.5  
mysql.3.23.58  
No extra packages were found.  
End of System Configuration  
The system configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-setconfigtype.  
Start of E-mail (sSMTP) Configuration  
After successful completion of the system configuration, the script will  
prompt you to set up the e-mail notification utility. The utility sends  
e-mails when conferences are created and modified, and when users  
attempt to add contacts to their buddy lists. E-mail notification works  
once users have added their e-mail addresses to the 3Com IP  
Conferencing Module.  
Configuration for sSMTP  
(1) mailhub  
This is the computer responsible for handling your outgoing mail. It could be the  
SMTP server of your ISP, or a departmental mailhub. Use the fully-qualified domain  
name (foo.bar.baz) of the mailhub; if it uses an unusual SMTP port number, use the  
colon syntax  
foo.bar.baz:2525  
Otherwise sSMTP will use the standard SMTP port number (25).  
(Note that sSMTP can support a user-dependent mailhub with the'reverse aliases'  
feature, for which see the man page.)  
Please enter your mailhub []: mail.yourcompany.com  
Enter the fully qualified domain name of the computer handling outgoing  
mail.  
 
 
Dual Server Initial Installation  
45  
(2) FromLineOverride  
This specifies how sSMTP handles the From: line of outgoing mail. If  
FromLineOverride=YES, sSMTP will leave the From: line alone if it already exists.  
If FromLineOverride has any other value, or there is no From: line, sSMTP creates  
the From: line using your username (or the -f command-line option), and the value of  
the rewriteDomain option (step (4), below). If you use a mail user agent (MUA; e.g.  
mutt, pine) I recommend using YES and having the MUA set the From: line.  
(Exception: the 'reverse aliases' feature can be used to set up a particular From:  
address for each user, in which case don't use FromLineOverride=YES. See the man  
page.)  
FromLineOverride? [YES]:  
Specify how sSMTP handles the From: line of outgoing mail.  
(3) hostname  
sSMTP uses the hostname of your computer to identify itself to the mailhub, and in  
the Received: headers of the outgoing mail. This has relatively little effect on how  
the mail is handled. Use the fully-qualified domain name (FQDN) of your  
computer(foo.bar.baz). If it doesn't have a FQDN, use some name for your box.  
Hostname of your box [master.yourcompany.com]:  
Enter the host name of your computer handling outgoing mail.  
(4) rewriteDomain  
Please enter the mail name of your system.  
sSMTP uses this value to add a domain to unqualified e-mail addresses(addresses  
without an @-sign).  
You probably want to use the domain from your own e-mail address.You probably want  
to set up your MUA to handle unqualified addresses itself, in which case sSMTP will  
never have to use this.  
Mail name [master.yourcompany.com]:yourcompany.com  
Enter the mail name of your system.  
(5) root  
Last and least: if sSMTP finds an unqualified e-mail address among the recipients,  
and it corresponds to a username on your local machine with a userid less than 1000,  
then the e-mail is sent to this value instead. The idea is that mail sent to 'root'  
should probably go to 'postmaster' instead.  
If you set up your MUA to do its own handling of unqualified  
addresses, this is irrelevant. Use the default value of 'postmaster' or your own  
e-mail address if you're paranoid.  
System users receive mail at [postmaster]:postmaster  
 
46  
CHAPTER 2: INSTALLATION SCRIPTS  
Enter the system user e-mail address.  
Note: check with your e-mail administrator for the proper system user  
e-mail address.  
Wrote configuration file /etc/ssmtp/ssmtp.conf  
Starting mysqld daemon with databases from /opt/3comdata/mysql  
Tcl is already installed  
Tcl version is 8.3  
Please report any installation problem to  
"3Com Support" <[email protected]>  
End of E-mail (sSMTP) Configuration  
The e-mail configuration is complete. If necessary, you can re-run this  
portion of the script by entering usr/sbin/smtp-configure.  
Start of Database Configuration  
After successful completion of the e-mail configuration, the script will  
prompt you to select a database configuration.  
There are different ways to install and access the database.  
1 Local Master: this server will have the master database.  
2 Local Slave: this server will have a slave database.  
3 Remote database: database is on another server.  
Please choose one of the above options: 1  
Select “1” to specify that this server will initially host the master database  
as the primary server in a distributed system.  
Available applications: gui,vcxdb,sippeng,  
End of Database Configuration  
The database configuration is complete. If necessary, you can re-run this  
portion of the script by entering presconf-setup.  
Start of IP Conferencing Module Configuration  
After successful completion of the database configuration, the script will  
prompt you to select an initial configuration.  
Enter the fully qualified hostname for this installation.  
 
   
Dual Server Initial Installation  
47  
[host.yourcompany.com]:  
Assuming default value as master.yourcompany.com  
Enter the fully qualified hostname of the machine you are installing on.  
Assuming the userid of the administrator who will manage the  
applications for your domain is root  
Enter the administrator's email address. [[email protected]]:  
Assuming default value as [email protected]  
Enter the administrator’s e-mail address. The default is derived from the  
hostname defined in the network configuration (above).  
If the system is configured to send e-mail notification of conference  
events to users, the e-mails will appear to be sent from the administrator  
(sipadmin@yourcompany.com). Note that some mail agents may require  
this to be a valid e-mail address.  
Host Identifier (hostid) of this machine is: 75896dc20fa90922ddbb2b81  
Please send an email to [email protected] to receive an activation key to activate  
this product.  
Please enter the software activation keys one by one; end with an empty line:  
Send the host ID to 3Com, which will use it to generate your activation  
keys. Once 3Com has returned the activation keys to you, you can paste  
them into the install session when prompted.  
The activation keys are validated as they are entered. If validation is  
successful, the keys will be stored in a license file and the installation  
session will continue. If validation is unsuccessful, the installation session  
will be aborted.  
Enter key:  
sippeng:master.yourcompany.com:+:-:-:-:5ea71ce717ea55627152a1db82d54592  
key ok for sippeng  
Enter key:  
License file name: /opt/3com/components/presconf.2.5.21/presconf_licenses  
Validating the license for sippeng application ...  
The license key  
sippeng:master.yourcompany.com:+:-:-:-:5ea71ce717ea55427192a1db82d54592 is valid  
MySQL is needed for your application.  
mysql is found at /opt/3com/VCX/bin/mysql  
 
48  
CHAPTER 2: INSTALLATION SCRIPTS  
Assuming mysql is already installed  
Enter the mysql user name for accessing the master database.[root]:  
Assuming default value as root  
Enter the host name on which the master database is running. [localhost]:  
Assuming default value as localhost  
Enter the mysql password for user root at localhost. [NULL]:  
Assuming default value as NULL  
-- Creating cinema_db.conf  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.2.2.190  
to 755.  
-- Trying to load fbsql.so...  
-- fbsql is loaded...  
-- Opening the database sql://root:NULL@localhost/mysql  
-- Changing permissions for master.yourcompany.com  
-- Changing permissions for localhost  
-- Changing permissions for master.yourcompany.com  
-- Changing permissions for master.yourcompany.com  
-- Flushing privleges  
-- Calling createdb  
Create the database.  
Try connecting to it.  
*** Checking table vxml_users ***  
Creating table vxml_users  
*** Checking table put ***  
Creating table put  
*** Checking table aliases ***  
Creating table aliases  
*** Checking table about ***  
Creating table about  
*** Checking table requestlog ***  
Creating table requestlog  
Cannot select database sip: Error 1049 (Unknown database 'sip')  
*** Checking table gwclass ***  
Creating table gwclass  
*** Checking table debug_config ***  
Creating table debug_config  
*** Checking table personnote ***  
Creating table personnote  
*** Checking table cVPN_timetable ***  
Creating table cVPN_timetable  
*** Checking table confatt_record ***  
Creating table confatt_record  
 
Dual Server Initial Installation  
49  
*** Checking table dialplan ***  
Creating table dialplan  
*** Checking table radius_config ***  
Creating table radius_config  
*** Checking table display ***  
Creating table display  
*** Checking table dbservers ***  
Creating table dbservers  
*** Checking table domain ***  
Creating table domain  
*** Checking table sipd_log ***  
Creating table sipd_log  
*** Checking table conferences ***  
Creating table conferences  
*** Checking table eventattendee ***  
Creating table eventattendee  
*** Checking table user_config ***  
Creating table user_config  
*** Checking table cinema ***  
Creating table cinema  
*** Checking table address ***  
Creating table address  
*** Checking table confinstances ***  
Creating table confinstances  
*** Checking table conferencing_config ***  
Creating table conferencing_config  
*** Checking table registrar_presence ***  
Creating table registrar_presence  
*** Checking table person ***  
Creating table person  
*** Checking table conf_log ***  
Creating table conf_log  
*** Checking table agendaitem ***  
Creating table agendaitem  
*** Checking table Rooms ***  
Creating table Rooms  
*** Checking table resource ***  
Creating table resource  
*** Checking table conffiles ***  
Creating table conffiles  
*** Checking table event ***  
Creating table event  
*** Checking table acl ***  
Creating table acl  
*** Checking table license ***  
Creating table license  
 
50  
CHAPTER 2: INSTALLATION SCRIPTS  
*** Checking table vote ***  
Creating table vote  
*** Checking table presence_conf ***  
Creating table presence_conf  
*** Checking table eventresource ***  
Creating table eventresource  
*** Checking table speed_dial ***  
Creating table speed_dial  
*** Checking table vcxdb_conf ***  
Creating table vcxdb_conf  
*** Checking table RoomACL ***  
Creating table RoomACL  
*** Checking table Cards ***  
Creating table Cards  
*** Checking table groupmember ***  
Creating table groupmember  
*** Checking table subscription ***  
Creating table subscription  
*** Checking table messageboard ***  
Creating table messageboard  
*** Checking table confsrv_config ***  
Creating table confsrv_config  
*** Checking table ua_capabilities ***  
Creating table ua_capabilities  
*** Checking table trusted_host ***  
Creating table trusted_host  
*** Checking table vmail ***  
Creating table vmail  
*** Checking table tariff ***  
Creating table tariff  
*** Checking table RoomPrefs ***  
Creating table RoomPrefs  
*** Checking table contacts ***  
Creating table contacts  
*** Checking table ConfigData ***  
Creating table ConfigData  
*** Checking table confservers ***  
Creating table confservers  
*** Checking table eventcategory ***  
Creating table eventcategory  
*** Checking table user_presence ***  
Creating table user_presence  
*** Checking table confnotification ***  
Creating table confnotification  
*** Checking table location_tuples ***  
Creating table location_tuples  
 
Dual Server Initial Installation  
51  
*** Checking table Credentials ***  
Creating table Credentials  
*** Checking table mail_account ***  
Creating table mail_account  
*** Checking table eventgroup ***  
Creating table eventgroup  
*** Checking table eventgroup_notify ***  
Creating table eventgroup_notify  
*** Checking table gateway_map ***  
Creating table gateway_map  
*** Checking table confusers ***  
Creating table confusers  
*** Checking table thirdparty ***  
Creating table thirdparty  
*** Checking table election ***  
Creating table election  
*** Checking table persongroup ***  
Creating table persongroup  
*** Checking table sipd_config ***  
Creating table sipd_config  
*** Checking table ssl_config ***  
Creating table ssl_config  
-- createdb is complete  
-- *IMPORTANT*: Adding administrator [email protected] with password root  
-- Database is successfully initialized.  
MYSQL host is localhost  
MYSQL user is root  
Enter the IP address of the VCX Data Server: 10.20.30.41  
Enter the IP address of the VCX data server that contains the global  
directory of users to be downloaded to this IP Conferencing Module.  
Enter the username for VCX DB Sync: vcx  
Enter the username for VCX database synchronization.  
Enter the password for VCX DB Sync: vcx  
Enter the password for VCX database synchronization. The password  
does not echo on the screen.  
Do users on this VCX have their home presence server on this installation (y/n)?[y]:  
Assuming the default value as y  
Enter no [n] if the VCX data server containing the global directory of users  
(see above) is not a local VCX for this installation.  
# 10.20.30.40 SSH-1.99-OpenSSH_3.6.1p2  
# 10.20.30.40 SSH-1.99-OpenSSH_3.6.1p2  
 
52  
CHAPTER 2: INSTALLATION SCRIPTS  
OK  
now testing if we can connect to the 10.20.30.41  
vcx  
updating the configuration database entries  
3Com IP Conferencing Module applications will be automatically restarted when  
system reboots  
-- Installing SIP Conferencing servers ...  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.5.21.  
restarting httpd...  
Creating a directory client_config to hold the soft client  
autoconfiguration files...  
Directory created successfully at  
/opt/3com/components/presconf.2.5.21/client_config  
Any files that you store in this directory are accessible via  
http://master.yourcompany.com/3c3/<CONFIGFILENAME>.xml  
If you have not already entered the license string during installation  
you must do so from the web interface before trying to run any  
application in 3Com software.  
You may start, stop and monitor the 3Com IP Conferencing Module applications using  
the following command(s):  
> service <application> start|stop|status|restart  
Else, you may do so using the web interface.  
Your installation is complete.  
To add new user or to change your profile visit appropriate  
URL corresponding to /opt/3com/components/presconf.2.5.3/gui.  
Once again, Please report any installation problem to  
"3Com Support" <[email protected]>  
****************************************************  
* Output, from this install session, was saved to:  
* /opt/3com/components/presconf.2.5.3/install_log.Dec_07_2005  
****************************************************  
Would you like to start the 3Com IP Conferencing Module services now?  
(N/Y) [N]: y  
 
Dual Server Initial Installation  
53  
Select “Y” to complete the installation and start the services.  
Starting VCX Services:  
Starting vcx/mysql:  
[ OK ]  
Starting vcx/db_watchdog: Starting Darabase Watchdog: Missing database  
configuration file; cannot continue.  
[FAILED]  
Starting vcx/sippeng:  
Starting vcx/vcxdb:  
[ OK ]  
[ OK ]  
Started VCX Services: 3 started, 1 failed to start  
All services will start except DB_watchdog. It starts after the secondary  
server is installed and the database replication process is initiated.  
End of IP Conferencing Module Configuration  
Sample vcx-setup This script programs the secondary server in a dual server configuration.  
Script (Secondary The slave database is installed and initially hosted on the secondary  
server) server.  
The following options are selected in this sample script:  
n
Data server for presence and conferencing configuration (installs the  
conference & presence database)  
n
Slave database configuration.  
The vcx-setup script displays the current settings and then asks you if you  
want to accept or update them. Sample answers are provided in bold  
type along with explanations of those answers. Explanations are in italics.  
To run the vcx-setup script:  
1 Log in to the server as root.  
2 Enter a password (default is pvadmin).  
3 Press Enter (or Return).  
-bash-2.05b# vcx-setup  
Enter vcx-setup at the command prompt.  
---------------------------------------------------------------------------  
---------- Welcome to the VCX Linux Network Configuration Wizard ----------  
---------------------------------------------------------------------------  
This wizard sets up networking and related services.  
 
   
54  
CHAPTER 2: INSTALLATION SCRIPTS  
Start of Network Configuration  
Configure networking now? [yes] :  
Press the Enter or Return key to accept yes as the suggested answer.  
--------- Configuring Dynamic Host Configuration Protocol (DHCP) ----------  
VCX servers can use DHCP for automated configuration, but this requires  
that the DHCP server is configured to provide the proper options. Unless  
you know that your environment is set up in this way, you should say 'no'  
here and configure static network parameters.  
Use DHCP on eth0 to configure network parameters? [no] :  
---------- Configuring Hostname ----------  
Enter system hostname [localhost] : slave.yourcompany.com  
---------- Configuring IP Interface 'eth0' ----------  
Enter IP Address  
Enter Network Subnet Mask  
[192.168.1.100 ] : 10.20.30.61  
[255.255.255.0 ] : 255.255.255.0  
Enter Default Gateway Address [10.20.30.254 ] : 10.20.30.254  
---------- Configuring IP Interface 'eth1' ----------  
Interface State  
: disabled  
Note that ‘eth1’ is not used for the 3Com IP Conferencing Module.  
---------- Configuring DNS Servers ----------  
Enter DNS servers one at a time.  
When done, enter 0.0.0.0 to stop.  
Primary DNS Server [192.168.1.1] : 10.25.10.31  
Secondary DNS Server [192.168.1.2] : 10.26.10.31  
Tertiary DNS Server [0.0.0.0] : 0.0.0.0  
---------- Configuring DNS Search Path ----------  
Press Enter to leave the current path unchanged, or specify  
a new search path, with spaces separating each entry.  
DNS Search Path []: yourcompany.com  
---------- Configuring Network Time Protocol ----------  
Enter NTP servers one at a time.  
When done, enter 0.0.0.0 to stop.  
Primary NTP Server [192.168.1.253] : 10.35.10.51  
Secondary NTP Server [192.168.1.252] : 10.36.10.51  
Additional NTP Server : 10.1.0.3  
 
 
Dual Server Initial Installation  
55  
-------------------------- Configuring Time Zone --------------------------  
Please select a geographic location from the following list:  
1. Africa  
2. Americas  
3. Antarctica  
4. Arctic Ocean  
5. Asia  
6. Atlantic Ocean  
7. Australia  
8. Europe  
9. Indian Ocean  
10. Pacific Ocean  
Enter continent [2] :  
Press the Enter or Return key to accept 2 as the suggested answer.  
Please select a country from the following list:  
1. Antigua & Barbuda  
2. Anguilla  
18. Ecuador  
19. Grenada  
35. Panama  
36. Peru  
3. Netherlands Antilles 20. French Guiana  
37. St Pierre & Miquelon  
38. Puerto Rico  
39. Paraguay  
4. Argentina  
5. Aruba  
6. Barbados  
7. Bolivia  
21. Greenland  
22. Guadeloupe  
23. Guatemala  
24. Guyana  
40. Suriname  
41. El Salvador  
42. Turks & Caicos Is  
43. Trinidad & Tobago  
44. United States  
45. Uruguay  
46. St Vincent  
47. Venezuela  
48. Virgin Islands (UK)  
49. Virgin Islands (US)  
8. Brazil  
9. Bahamas  
25. Honduras  
26. Haiti  
10. Belize  
27. Jamaica  
11. Canada  
12. Chile  
28. St Kitts & Nevis  
29. Cayman Islands  
30. St Lucia  
31. Martinique  
32. Montserrat  
33. Mexico  
13. Colombia  
14. Costa Rica  
15. Cuba  
16. Dominica  
17. Dominican Republic  
Enter country [44] :  
34. Nicaragua  
Press the Enter or Return key to accept 44 as the suggested answer.  
Please select a time zone from the following list:  
1. Alaska Time  
2. Alaska Time - Alaska panhandle  
3. Alaska Time - Alaska panhandle neck  
4. Alaska Time - west Alaska  
5. Aleutian Islands  
6. Central Time  
 
56  
CHAPTER 2: INSTALLATION SCRIPTS  
7. Central Time - Michigan - Wisconsin border  
8. Central Time - North Dakota - Oliver County  
9. Eastern Standard Time - Indiana - Crawford County  
10. Eastern Standard Time - Indiana - Starke County  
11. Eastern Standard Time - Indiana - Switzerland County  
12. Eastern Standard Time - Indiana - most locations  
13. Eastern Time  
14. Eastern Time - Kentucky - Louisville area  
15. Eastern Time - Kentucky - Wayne County  
16. Eastern Time - Michigan - most locations  
17. Hawaii  
18. Mountain Standard Time - Arizona  
19. Mountain Time  
20. Mountain Time - Navajo  
21. Mountain Time - south Idaho & east Oregon  
22. Pacific Time  
Enter zone [13] :  
Selected Time Zone:  
America/New_York  
-------------------------- CONFIGURATION SUMMARY --------------------------  
DHCP state: disabled  
Hostname: slave.yourcompany.com  
IP Interfaces: Device  
IP Address  
10.20.30.60  
(interface is disabled)  
Network Mask  
255.255.0.0  
Default Gateway  
10.20.30.254  
eth0  
eth1  
DNS Servers:  
10.25.10.31  
10.26.10.31  
Search Domains:yourcompany.com  
NTP Servers:  
10.35.10.51  
10.36.10.51  
10.1.0.3  
Time Zone:  
America/New_York  
---------------------------------------------------------------------------  
Is all of the above information correct? [yes] :  
---------------------------------------------------------------------------  
---------------------------------------------------------------------------  
Please wait while the wizard completes.  
Saving configuration...Done.  
 
Dual Server Initial Installation  
57  
End of Network Configuration  
The network configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-config-network -wizard.  
Start of System Configuration  
After successful completion of the network configuration, the script will  
prompt you to select a set of services.  
----------------------- Select System Configuration -----------------------  
Individual systems may provide various services in a VCX installation.You  
must select the appropriate set of services which this system is to  
provide. Be certain that the selection corresponds to the functionality  
you have purchased.  
Which services will this system provide?  
1. Presence and Conference - all in one  
2. Conferencing server  
3. Conferencing and database server  
4. Data server for presence and conferencing  
5. Presence server (with database)  
Enter your choice (1-5) : 3  
Select “3” to install the following components:  
- conference server  
- conference attendant server  
- conference & presence database.  
You have chosen to configure this system to provide:  
Conferencing and database server  
Note that in order for these services to work, you must have purchased an  
appropriate license and installed the corresponding license activation key  
on this system.  
*** WARNING *** Once you confirm your selection, you cannot change it.  
Are you absolutely certain that you wish to configure this system as an  
 
 
58  
CHAPTER 2: INSTALLATION SCRIPTS  
'Data server for presence and conferencing' server? If you answer 'no'  
here you can choose an alternative configuration.  
Confirm selection? [no] : y  
Selection confirmed.  
*** Assembling VCX.2.9.21 using 'VSBOM.xml' ***  
*** Processing components ***  
*** Executing assembly commands ***  
*** Assembly complete ***  
The VCX assembly has been created. Preparing system for use:  
Performing early startup tasks:  
Starting VCX-Firewall:  
Starting httpd:  
[ OK ]  
[ OK ]  
Removing unneeded application components from the system.  
This may take several minutes. Please wait while the operation completes.  
Determining which packages are not used by any VCX version:  
oem.7.0.1  
: [REMOVE]  
presconf-conf.2.5.21  
presconf-presence.2.5.21  
presconf-web.2.5.21  
vcx-firewall.1.5.6  
mysql.3.23.58  
: [REMOVE]  
: [REMOVE]  
: [REMOVE]  
: [keep; used in 2.9.21]  
: [keep; used in 2.9.21]  
Removing packages:  
oem-a-7.0.1-2  
: [OK]  
: [OK]  
: [OK]  
: [OK]  
: [OK]  
presconf-conf-2.5.21-1  
presconf-presence-2.5.21-1  
presconf-vcxdb-2.5.21-1  
presconf-web-2.5.21-1  
Successfully removed extra packages.  
End of System Configuration  
The system configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-setconfigtype.  
 
Dual Server Initial Installation  
59  
Start of E-mail (sSMTP) Configuration  
After successful completion of the system configuration, the script will  
prompt you to set up the e-mail notification utility. The utility sends  
e-mails when conferences are created and modified, and when users  
attempt to add contacts to their buddy lists. E-mail notification works  
once users have added their e-mail addresses to the 3Com IP  
Conferencing Module.  
Configuration for sSMTP  
(1) mailhub  
This is the computer responsible for handling your outgoing mail. It could be the  
SMTP server of your ISP, or a departmental mailhub. Use the fully-qualified domain  
name (foo.bar.baz) of the mailhub; if it uses an unusual SMTP port number, use the  
colon syntax  
foo.bar.baz:2525  
Otherwise sSMTP will use the standard SMTP port number (25).  
(Note that sSMTP can support a user-dependent mailhub with the'reverse aliases'  
feature, for which see the man page.)  
Please enter your mailhub []: mail.yourcompany.com  
Enter the fully qualified domain name of the computer handling outgoing  
mail.  
(2) FromLineOverride  
This specifies how sSMTP handles the From: line of outgoing mail. If  
FromLineOverride=YES, sSMTP will leave the From: line alone if it already exists.  
If FromLineOverride has any other value, or there is no From: line, sSMTP creates  
the From: line using your username (or the -f command-line option), and the value of  
the rewriteDomain option (step (4), below). If you use a mail user agent (MUA; e.g.  
mutt, pine) I recommend using YES and having the MUA set the From: line.  
(Exception: the 'reverse aliases' feature can be used to set up a particular From:  
address for each user, in which case don't use FromLineOverride=YES. See the man  
page.)  
FromLineOverride? [YES]:  
Specify how sSMTP handles the From: line of outgoing mail.  
(3) hostname  
sSMTP uses the hostname of your computer to identify itself to the mailhub, and in  
the Received: headers of the outgoing mail. This has relatively little effect on how  
the mail is handled. Use the fully-qualified domain name (FQDN) of your  
computer(foo.bar.baz). If it doesn't have a FQDN, use some name for your box.  
 
 
60  
CHAPTER 2: INSTALLATION SCRIPTS  
Hostname of your box [slave.yourcompany.com]:  
Enter the host name of your computer handling outgoing mail.  
(4) rewriteDomain  
Please enter the mail name of your system.  
sSMTP uses this value to add a domain to unqualified e-mail addresses(addresses  
without an @-sign).  
You probably want to use the domain from your own e-mail address.You probably want  
to set up your MUA to handle unqualified addresses itself, in which case sSMTP will  
never have to use this.  
Mail name [slave.yourcompany.com]:yourcompany.com  
Enter the mail name of your system.  
(5) root  
Last and least: if sSMTP finds an unqualified e-mail address among the recipients,  
and it corresponds to a username on your local machine with a userid less than 1000,  
then the e-mail is sent to this value instead. The idea is that mail sent to 'root'  
should probably go to 'postmaster' instead.  
If you set up your MUA to do its own handling of unqualified  
addresses, this is irrelevant. Use the default value of 'postmaster' or your own  
e-mail address if you're paranoid.  
System users receive mail at [postmaster]:postmaster  
Enter the system user e-mail address.  
Note: check with your e-mail administrator for the proper system user  
e-mail address.  
Wrote configuration file /etc/ssmtp/ssmtp.conf  
Starting mysqld daemon with databases from /opt/3comdata/mysql  
Tcl is already installed  
Tcl version is 8.3  
Please report any installation problem to  
"3Com Support" <[email protected]>  
End of E-mail (sSMTP) Configuration  
The e-mail configuration is complete. If necessary, you can re-run this  
portion of the script by entering usr/sbin/smtp-configure.  
 
Dual Server Initial Installation  
61  
Start of Database Configuration  
After successful completion of the e-mail configuration, the script will  
prompt you to select a database configuration.  
There are different ways to install and access the database.  
1 Local Master: this server will have the master database.  
2 Local Slave: this server will have a slave database.  
3 Remote database: database is on another server.  
Please choose one of the above options: 2  
Select “2” to specify that this server will initially host the slave database as  
the secondary server in a distributed system.  
Available applications:  
End of Database Configuration  
The database configuration is complete. If necessary, you can re-run this  
portion of the script by entering presconf-setup.  
Start of IP Conferencing Module Configuration  
After successful completion of the database configuration, the script will  
prompt you to select an initial configuration.  
Enter the fully qualified hostname for this installation.  
[slave.yourcompany.com]:  
Assuming default value as slave.yourcompany.com  
Enter the fully qualified hostname of the machine you are installing on.  
Assuming the userid of the administrator who will manage the  
applications for your domain is root  
Enter the administrator's email address. [[email protected]]:  
Assuming default value as [email protected]  
Enter the administrator’s e-mail address. The default is derived from the  
hostname defined in the network configuration (above).  
If the system is configured to send e-mail notification of conference  
events to users, the e-mails will appear to be sent from the administrator  
(sipadmin@yourcompany.com). Note that some mail agents may require  
this to be a valid e-mail address.  
 
   
62  
CHAPTER 2: INSTALLATION SCRIPTS  
Host Identifier (hostid) of this machine is: 75896dc20fa90922ddbb2b81  
Please send an email to [email protected] to receive an activation key to activate  
this product.  
Please enter the software activation keys one by one; end with an empty line:  
Send the host ID to 3Com, which will use it to generate your activation  
keys. Once 3Com has returned the activation keys to you, you can paste  
them into the install session when prompted.  
The activation keys are validated as they are entered. If validation is  
successful, the keys will be stored in a license file and the installation  
session will continue. If validation is unsuccessful, the installation session  
will be aborted.  
Enter key:  
sippeng:master.yourcompany.com:+:-:-:-:5ea71ce717ea55627152a1db82d54592  
key ok for sippeng  
Enter key:  
License file name: /opt/3com/components/presconf.2.5.21/presconf_licenses  
Enter the mysql user name for accessing the master database.[root]:  
Assuming default value as root  
Enter the host name on which the master database is running. []:  
master.yourcompany.com  
Enter the host name of the master (primary) server.  
Enter the mysql password for user root at master.yourcompany.com. [NULL]:  
Assuming default value as NULL  
The command scripts/remote_access.sh needs to be run on the master server to allow  
access to this server. Has this been done? y/n: y  
To allow access to the secondary server:  
1. Open a command window on the the master (primary) server  
2. Run remote_access.sh <secondary-server hostname | IP>  
3. When prompted, enter the password for the slave (secondary) server  
(default is pvadmin)  
4. Return to the slave (secondary) server and enter “Y” at the prompt.  
Please enable remote access to the master server by providing the root password for  
master.yourcompany.com  
 
Dual Server Initial Installation  
63  
REMOTE is at master.yourcompany.com  
Enter the password for [email protected]: pvadmin  
Enter the password for the master (primary) server.  
# master.yourcompany.com SSH-1.99-OpenSSH_3.6.1p2  
# master.yourcompany.com SSH-1.99-OpenSSH_3.6.1p2  
Warning: Permanently added the RSA host key for IP address '10.1.0.249' to the list  
of known hosts.  
[email protected]'s password:  
OK  
now testing if we can connect to master.yourcompany.com  
SUCCESS  
Continuing slave database installation...  
Master server hostname is <master.yourcompany.com>  
Enter the fully qualified host name or IP address for the slave server. Default  
[presconf1.yourcompany.com]:  
Assuming default value as presconf1.yourcompany.com  
Creating cinema_db2.conf on master database server  
On master database server copy cinema_db.conf to cinema_db1.conf  
In my.cnf on master, ensure server-id exists and binary logging is enabled.  
MySQL my.cnf files updated. Copying modified my.cnf file back to master database  
server  
Grant access to master database from this server  
Opening slave database.  
On slave run mysql CHANGE MASTER and have it point to the master db.  
Enter the mysql replication password for this installation (both master and slave)  
On slave GRANT ACCESS to the master database using the replication password  
Create the SIP database now to avoid errors with mysqldump later on  
Allow access to the mysql port through the firewall for both master and slave  
Opening master database.  
Run mysql CHANGE MASTER and have it point to the slave db.  
On master GRANT ACCESS to the slave database using the replication password  
Insert a record for the new database into dbservers table on master database.  
Restart the slave database.  
060112 10:56:27 mysqld ended  
Slave database successfully installed.  
Call make_slave.sh to dump the master database and start replication.  
Check if watchdog is already running  
Watchdog is not running - starting it  
Watchdog is running  
Ensure watchdog is running on master database server.  
db_watchdog is probably not running on master.yourcompany.com. Try starting it.  
db_watchdog successfully started on master.yourcompany.com  
Slave successfully installed  
-- Creating cinema_db.conf  
 
64  
CHAPTER 2: INSTALLATION SCRIPTS  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.5.21 to  
755.  
-- Trying to load fbsql.so...  
-- fbsql is loaded...  
-- Opening the database sql://root:[email protected]/mysql  
-- Changing permissions for presconf1.yourcompany.com  
-- Changing permissions for master.yourcompany.com  
-- Changing permissions for presconf1.yourcompany.com  
-- Changing permissions for presconf1.yourcompany.com  
-- Flushing privleges  
-- Opening the database sql://root:[email protected]/mysql  
-- Database is successfully initialized.  
3Com IP Conferencing Module applications will be automatically restarted when  
system reboots  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.5.21.  
restarting httpd...  
Creating a directory client_config to hold the soft client  
autoconfiguration files...  
Directory created successfully at  
/opt/3com/components/presconf.2.5.21/client_config  
Any files that you store in this directory are accessible via  
http://presconf1.yourcompany.com/3c3/<CONFIGFILENAME>.xml  
If you have not already entered the license string during installation  
you must do so from the web interface before trying to run any  
application in 3Com software.  
You may start, stop and monitor the 3Com IP Conferencing Module applications using  
the following command(s):  
> service <application> start|stop|status|restart  
Else, you may do so using the web interface.  
Your installation is complete.  
To add new user or to change your profile visit appropriate  
URL corresponding to /opt/3com/components/presconf.2.5.21/gui.  
Once again, Please report any installation problem to  
"3Com Support" <[email protected]>  
****************************************************  
* Output, from this install session, was saved to:  
* install_log.Jan_12_2006  
****************************************************  
 
Multiple Server Initial Installation  
65  
Would you like to start the 3Com IP Conferencing Module services now?  
(N/Y) [N]: y  
Select “Y” to complete the installation and start the services.  
Starting VCX Services:  
Starting vcx/mysql:  
[ OK ]  
Starting vcx/db_watchdog:  
[ OK ]  
Started VCX Services: 2 started.  
All services will start.  
Multiple Server  
Initial Installation  
This section contains sample scripts for the multiple server configuration  
(four to twelve servers). Three samples are provided:  
n
n
n
Sample vcx-setup Script (Primary server)  
Sample vcx-setup Script (Secondary server)  
Sample vcx-setup Script (Conference server)  
Sample vcx-setup This script programs the primary server in a multiple server configuration.  
Script (Primary The master database is installed and initially hosted on the primary server.  
server)  
The following options are selected in this sample script:  
n
n
Presence server configuration (installs the presence server, web server,  
VCX user database, and conference & presence database)  
Master database configuration.  
The vcx-setup script displays the current settings and then asks you if you  
want to accept or update them. Sample answers are provided in bold  
type along with explanations of those answers. Explanations are in italics.  
To run the vcx-setup script:  
1 Log in to the server as root.  
2 Enter a password (default is pvadmin).  
3 Press Enter (or Return).  
-bash-2.05b# vcx-setup  
Enter vcx-setup at the command prompt.  
 
     
66  
CHAPTER 2: INSTALLATION SCRIPTS  
---------------------------------------------------------------------------  
---------- Welcome to the VCX Linux Network Configuration Wizard ----------  
---------------------------------------------------------------------------  
This wizard sets up networking and related services.  
Start of Network Configuration  
Configure networking now? [yes] :  
Press the Enter or Return key to accept yes as the suggested answer.  
--------- Configuring Dynamic Host Configuration Protocol (DHCP) ----------  
VCX servers can use DHCP for automated configuration, but this requires  
that the DHCP server is configured to provide the proper options. Unless  
you know that your environment is set up in this way, you should say 'no'  
here and configure static network parameters.  
Use DHCP on eth0 to configure network parameters? [no] :  
---------- Configuring Hostname ----------  
Enter system hostname [localhost] : master.yourcompany.com  
---------- Configuring IP Interface 'eth0' ----------  
Enter IP Address  
Enter Network Subnet Mask  
[192.168.1.100 ] : 10.20.30.60  
[255.255.255.0 ] : 255.255.255.0  
Enter Default Gateway Address [10.20.30.254 ] : 10.20.30.254  
---------- Configuring IP Interface 'eth1' ----------  
Interface State  
: disabled  
Note that ‘eth1’ is not used for the 3Com IP Conferencing Module.  
---------- Configuring DNS Servers ----------  
Enter DNS servers one at a time.  
When done, enter 0.0.0.0 to stop.  
Primary DNS Server [192.168.1.1] : 10.25.10.31  
Secondary DNS Server [192.168.1.2] : 10.26.10.31  
Tertiary DNS Server [0.0.0.0] : 0.0.0.0  
---------- Configuring DNS Search Path ----------  
Press Enter to leave the current path unchanged, or specify  
a new search path, with spaces separating each entry.  
DNS Search Path []: yourcompany.com  
---------- Configuring Network Time Protocol ----------  
Enter NTP servers one at a time.  
 
 
Multiple Server Initial Installation  
67  
When done, enter 0.0.0.0 to stop.  
Primary NTP Server [192.168.1.253] : 10.35.10.51  
Secondary NTP Server [192.168.1.252] : 10.36.10.51  
Additional NTP Server : 10.1.0.3  
-------------------------- Configuring Time Zone --------------------------  
Please select a geographic location from the following list:  
1. Africa  
2. Americas  
3. Antarctica  
4. Arctic Ocean  
5. Asia  
6. Atlantic Ocean  
7. Australia  
8. Europe  
9. Indian Ocean  
10. Pacific Ocean  
Enter continent [2] :  
Press the Enter or Return key to accept 2 as the suggested answer.  
Please select a country from the following list:  
1. Antigua & Barbuda  
2. Anguilla  
18. Ecuador  
19. Grenada  
35. Panama  
36. Peru  
3. Netherlands Antilles 20. French Guiana  
37. St Pierre & Miquelon  
38. Puerto Rico  
39. Paraguay  
4. Argentina  
5. Aruba  
6. Barbados  
7. Bolivia  
21. Greenland  
22. Guadeloupe  
23. Guatemala  
24. Guyana  
40. Suriname  
41. El Salvador  
42. Turks & Caicos Is  
43. Trinidad & Tobago  
44. United States  
45. Uruguay  
46. St Vincent  
47. Venezuela  
48. Virgin Islands (UK)  
49. Virgin Islands (US)  
8. Brazil  
9. Bahamas  
25. Honduras  
26. Haiti  
10. Belize  
27. Jamaica  
11. Canada  
12. Chile  
28. St Kitts & Nevis  
29. Cayman Islands  
30. St Lucia  
31. Martinique  
32. Montserrat  
33. Mexico  
13. Colombia  
14. Costa Rica  
15. Cuba  
16. Dominica  
17. Dominican Republic  
Enter country [44] :  
34. Nicaragua  
Press the Enter or Return key to accept 44 as the suggested answer.  
Please select a time zone from the following list:  
1. Alaska Time  
 
68  
CHAPTER 2: INSTALLATION SCRIPTS  
2. Alaska Time - Alaska panhandle  
3. Alaska Time - Alaska panhandle neck  
4. Alaska Time - west Alaska  
5. Aleutian Islands  
6. Central Time  
7. Central Time - Michigan - Wisconsin border  
8. Central Time - North Dakota - Oliver County  
9. Eastern Standard Time - Indiana - Crawford County  
10. Eastern Standard Time - Indiana - Starke County  
11. Eastern Standard Time - Indiana - Switzerland County  
12. Eastern Standard Time - Indiana - most locations  
13. Eastern Time  
14. Eastern Time - Kentucky - Louisville area  
15. Eastern Time - Kentucky - Wayne County  
16. Eastern Time - Michigan - most locations  
17. Hawaii  
18. Mountain Standard Time - Arizona  
19. Mountain Time  
20. Mountain Time - Navajo  
21. Mountain Time - south Idaho & east Oregon  
22. Pacific Time  
Enter zone [13] :  
Selected Time Zone:  
America/New_York  
-------------------------- CONFIGURATION SUMMARY --------------------------  
DHCP state: disabled  
Hostname: master.yourcompany.com  
IP Interfaces: Device  
IP Address  
10.20.30.60  
(interface is disabled)  
Network Mask  
255.255.0.0  
Default Gateway  
10.20.30.254  
eth0  
eth1  
DNS Servers:  
10.25.10.31  
10.26.10.31  
Search Domains:yourcompany.com  
NTP Servers:  
10.35.10.51  
10.36.10.51  
10.1.0.3  
Time Zone:  
America/New_York  
---------------------------------------------------------------------------  
Is all of the above information correct? [yes] :  
 
Multiple Server Initial Installation  
69  
---------------------------------------------------------------------------  
---------------------------------------------------------------------------  
Please wait while the wizard completes.  
Saving configuration...Done.  
End of Network Configuration  
The network configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-config-network -wizard.  
Start of System Configuration  
After successful completion of the network configuration, the script will  
prompt you to select a set of services.  
----------------------- Select System Configuration -----------------------  
Individual systems may provide various services in a VCX installation.You  
must select the appropriate set of services which this system is to  
provide. Be certain that the selection corresponds to the functionality  
you have purchased.  
Which services will this system provide?  
1. Presence and Conference - all in one  
2. Conferencing server  
3. Conferencing and database server  
4. Data server for presence and conferencing  
5. Presence server (with database)  
Enter your choice (1-5) : 5  
Select “5” to install the following components:  
- presence server  
- web server  
- VCX user database  
- conference & presence database.  
You have chosen to configure this system to provide:  
Presence server (with database)  
Note that in order for these services to work, you must have purchased an  
 
 
70  
CHAPTER 2: INSTALLATION SCRIPTS  
appropriate license and installed the corresponding license activation key  
on this system.  
*** WARNING *** Once you confirm your selection, you cannot change it.  
Are you absolutely certain that you wish to configure this system as an  
'Presence server (with database)' server? If you answer 'no' here you  
can choose an alternative configuration.  
Confirm selection? [no] : y  
Confirm your selection by typing “y.”  
Selection confirmed.  
*** Assembling VCX.2.9.3 using 'VSBOM.xml' ***  
*** Processing components ***  
*** Executing assembly commands ***  
*** Assembly complete ***  
The VCX assembly has been created. Preparing system for use:  
Performing early startup tasks: [ OK ]  
Starting VCX-Firewall: [ OK ]  
Starting httpd:  
Removing unneeded application components from the system.  
This may take several minutes. Please wait while the operation completes.  
Determining which packages are not used by any VCX version:  
oem.7.0.1  
presconf.2.5.21  
: [keep; used in 2.9.21]  
: [keep; used in 2.9.21]  
: [REMOVE]  
: [keep; used in 2.9.21]  
: [keep; used in 2.9.21]  
: [keep; used in 2.9.21]  
: [keep; used in 2.9.21]  
: [keep; used in 2.9.21]  
presconf-conf.2.5.21  
presconf-presence.2.5.21  
presconf-vcxdb.2.5.21  
presconf-web.2.5.21  
vcx-firewall.1.5.6  
mysql.3.23.58  
Removing packages:  
presconf-conf-2.5.21-1  
: [OK]  
 
Multiple Server Initial Installation  
71  
Successfully removed extra packages.  
End of System Configuration  
The system configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-setconfigtype.  
Start of E-mail (sSMTP) Configuration  
After successful completion of the system configuration, the script will  
prompt you to set up the e-mail notification utility. The utility sends  
e-mails when conferences are created and modified, and when users  
attempt to add contacts to their buddy lists. E-mail notification works  
once users have added their e-mail addresses to the 3Com IP  
Conferencing Module.  
Configuration for sSMTP  
(1) mailhub  
This is the computer responsible for handling your outgoing mail. It could be the  
SMTP server of your ISP, or a departmental mailhub. Use the fully-qualified domain  
name (foo.bar.baz) of the mailhub; if it uses an unusual SMTP port number, use the  
colon syntax  
foo.bar.baz:2525  
Otherwise sSMTP will use the standard SMTP port number (25).  
(Note that sSMTP can support a user-dependent mailhub with the'reverse aliases'  
feature, for which see the man page.)  
Please enter your mailhub []: mail.yourcompany.com  
Enter the fully qualified domain name of the computer handling outgoing  
mail.  
(2) FromLineOverride  
This specifies how sSMTP handles the From: line of outgoing mail. If  
FromLineOverride=YES, sSMTP will leave the From: line alone if it already exists.  
If FromLineOverride has any other value, or there is no From: line, sSMTP creates  
the From: line using your username (or the -f command-line option), and the value of  
the rewriteDomain option (step (4), below). If you use a mail user agent (MUA; e.g.  
mutt, pine) I recommend using YES and having the MUA set the From: line.  
(Exception: the 'reverse aliases' feature can be used to set up a particular From:  
address for each user, in which case don't use FromLineOverride=YES. See the man  
page.)  
FromLineOverride? [YES]:  
 
 
72  
CHAPTER 2: INSTALLATION SCRIPTS  
Specify how sSMTP handles the From: line of outgoing mail.  
(3) hostname  
sSMTP uses the hostname of your computer to identify itself to the mailhub, and in  
the Received: headers of the outgoing mail. This has relatively little effect on how  
the mail is handled. Use the fully-qualified domain name (FQDN) of your  
computer(foo.bar.baz). If it doesn't have a FQDN, use some name for your box.  
Hostname of your box [master.yourcompany.com]:  
Enter the host name of your computer handling outgoing mail.  
(4) rewriteDomain  
Please enter the mail name of your system.  
sSMTP uses this value to add a domain to unqualified e-mail addresses(addresses  
without an @-sign).  
You probably want to use the domain from your own e-mail address.You probably want  
to set up your MUA to handle unqualified addresses itself, in which case sSMTP will  
never have to use this.  
Mail name [master.yourcompany.com]:yourcompany.com  
Enter the mail name of your system.  
(5) root  
Last and least: if sSMTP finds an unqualified e-mail address among the recipients,  
and it corresponds to a username on your local machine with a userid less than 1000,  
then the e-mail is sent to this value instead. The idea is that mail sent to 'root'  
should probably go to 'postmaster' instead.  
If you set up your MUA to do its own handling of unqualified  
addresses, this is irrelevant. Use the default value of 'postmaster' or your own  
e-mail address if you're paranoid.  
System users receive mail at [postmaster]:postmaster  
Enter the system user e-mail address.  
Note: check with your e-mail administrator for the proper system user  
e-mail address.  
Wrote configuration file /etc/ssmtp/ssmtp.conf  
Starting mysqld daemon with databases from /opt/3comdata/mysql  
Tcl is already installed  
Tcl version is 8.3  
Please report any installation problem to  
"3Com Support" <[email protected]>  
 
Multiple Server Initial Installation  
73  
End of E-mail (sSMTP) Configuration  
The e-mail configuration is complete. If necessary, you can re-run this  
portion of the script by entering usr/sbin/smtp-configure.  
Start of Database Configuration  
After successful completion of the e-mail configuration, the script will  
prompt you to select a database configuration.  
There are different ways to install and access the database.  
1 Local Master: this server will have the master database.  
2 Local Slave: this server will have a slave database.  
3 Remote database: database is on another server.  
Please choose one of the above options: 1  
Select “1” to specify that this server will initially host the master database  
as the primary server in a distributed system.  
Available applications: gui,vcxdb,sippeng,  
End of Database Configuration  
The database configuration is complete. If necessary, you can re-run this  
portion of the script by entering presconf-setup.  
Start of IP Conferencing Module Configuration  
After successful completion of the database configuration, the script will  
prompt you to select an initial configuration.  
Enter the fully qualified hostname for this installation.  
[host.yourcompany.com]:  
Assuming default value as master.yourcompany.com  
Enter the fully qualified hostname of the machine you are installing on.  
Assuming the userid of the administrator who will manage the  
applications for your domain is root  
Enter the administrator's email address. [[email protected]]:  
Assuming default value as [email protected]  
Enter the administrator’s e-mail address. The default is derived from the  
hostname defined in the network configuration (above).  
 
   
74  
CHAPTER 2: INSTALLATION SCRIPTS  
If the system is configured to send e-mail notification of conference  
events to users, the e-mails will appear to be sent from the administrator  
(sipadmin@yourcompany.com). Note that some mail agents may require  
this to be a valid e-mail address.  
Host Identifier (hostid) of this machine is: 75896dc20fa90922ddbb2b81  
Please send an email to [email protected] to receive an activation key to activate  
this product.  
Please enter the software activation keys one by one; end with an empty line:  
Send the host ID to 3Com, which will use it to generate your activation  
keys. Once 3Com has returned the activation keys to you, you can paste  
them into the install session when prompted.  
The activation keys are validated as they are entered. If validation is  
successful, the keys will be stored in a license file and the installation  
session will continue. If validation is unsuccessful, the installation session  
will be aborted.  
Enter key:  
sippeng:master.yourcompany.com:+:-:-:-:5ea71ce717ea55627152a1db82d54592  
key ok for sippeng  
Enter key:  
License file name: /opt/3com/components/presconf.2.5.21/presconf_licenses  
Validating the license for sippeng application ...  
The license key  
sippeng:master.yourcompany.com:+:-:-:-:5ea71ce717ea55427192a1db82d54592 is valid  
MySQL is needed for your application.  
mysql is found at /opt/3com/VCX/bin/mysql  
Assuming mysql is already installed  
Enter the mysql user name for accessing the master database.[root]:  
Assuming default value as root  
Enter the host name on which the master database is running. [localhost]:  
Assuming default value as localhost  
Enter the mysql password for user root at localhost. [NULL]:  
Assuming default value as NULL  
-- Creating cinema_db.conf  
 
Multiple Server Initial Installation  
75  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.2.2.190  
to 755.  
-- Trying to load fbsql.so...  
-- fbsql is loaded...  
-- Opening the database sql://root:NULL@localhost/mysql  
-- Changing permissions for master.yourcompany.com  
-- Changing permissions for localhost  
-- Changing permissions for master.yourcompany.com  
-- Changing permissions for master.yourcompany.com  
-- Flushing privleges  
-- Calling createdb  
Create the database.  
Try connecting to it.  
*** Checking table vxml_users ***  
Creating table vxml_users  
*** Checking table put ***  
Creating table put  
*** Checking table aliases ***  
Creating table aliases  
*** Checking table about ***  
Creating table about  
*** Checking table requestlog ***  
Creating table requestlog  
Cannot select database sip: Error 1049 (Unknown database 'sip')  
*** Checking table gwclass ***  
Creating table gwclass  
*** Checking table debug_config ***  
Creating table debug_config  
*** Checking table personnote ***  
Creating table personnote  
*** Checking table cVPN_timetable ***  
Creating table cVPN_timetable  
*** Checking table confatt_record ***  
Creating table confatt_record  
*** Checking table dialplan ***  
Creating table dialplan  
*** Checking table radius_config ***  
Creating table radius_config  
*** Checking table display ***  
Creating table display  
*** Checking table dbservers ***  
Creating table dbservers  
*** Checking table domain ***  
Creating table domain  
*** Checking table sipd_log ***  
Creating table sipd_log  
 
76  
CHAPTER 2: INSTALLATION SCRIPTS  
*** Checking table conferences ***  
Creating table conferences  
*** Checking table eventattendee ***  
Creating table eventattendee  
*** Checking table user_config ***  
Creating table user_config  
*** Checking table cinema ***  
Creating table cinema  
*** Checking table address ***  
Creating table address  
*** Checking table confinstances ***  
Creating table confinstances  
*** Checking table conferencing_config ***  
Creating table conferencing_config  
*** Checking table registrar_presence ***  
Creating table registrar_presence  
*** Checking table person ***  
Creating table person  
*** Checking table conf_log ***  
Creating table conf_log  
*** Checking table agendaitem ***  
Creating table agendaitem  
*** Checking table Rooms ***  
Creating table Rooms  
*** Checking table resource ***  
Creating table resource  
*** Checking table conffiles ***  
Creating table conffiles  
*** Checking table event ***  
Creating table event  
*** Checking table acl ***  
Creating table acl  
*** Checking table license ***  
Creating table license  
*** Checking table vote ***  
Creating table vote  
*** Checking table presence_conf ***  
Creating table presence_conf  
*** Checking table eventresource ***  
Creating table eventresource  
*** Checking table speed_dial ***  
Creating table speed_dial  
*** Checking table vcxdb_conf ***  
Creating table vcxdb_conf  
*** Checking table RoomACL ***  
Creating table RoomACL  
 
Multiple Server Initial Installation  
77  
*** Checking table Cards ***  
Creating table Cards  
*** Checking table groupmember ***  
Creating table groupmember  
*** Checking table subscription ***  
Creating table subscription  
*** Checking table messageboard ***  
Creating table messageboard  
*** Checking table confsrv_config ***  
Creating table confsrv_config  
*** Checking table ua_capabilities ***  
Creating table ua_capabilities  
*** Checking table trusted_host ***  
Creating table trusted_host  
*** Checking table vmail ***  
Creating table vmail  
*** Checking table tariff ***  
Creating table tariff  
*** Checking table RoomPrefs ***  
Creating table RoomPrefs  
*** Checking table contacts ***  
Creating table contacts  
*** Checking table ConfigData ***  
Creating table ConfigData  
*** Checking table confservers ***  
Creating table confservers  
*** Checking table eventcategory ***  
Creating table eventcategory  
*** Checking table user_presence ***  
Creating table user_presence  
*** Checking table confnotification ***  
Creating table confnotification  
*** Checking table location_tuples ***  
Creating table location_tuples  
*** Checking table Credentials ***  
Creating table Credentials  
*** Checking table mail_account ***  
Creating table mail_account  
*** Checking table eventgroup ***  
Creating table eventgroup  
*** Checking table eventgroup_notify ***  
Creating table eventgroup_notify  
*** Checking table gateway_map ***  
Creating table gateway_map  
*** Checking table confusers ***  
Creating table confusers  
 
78  
CHAPTER 2: INSTALLATION SCRIPTS  
*** Checking table thirdparty ***  
Creating table thirdparty  
*** Checking table election ***  
Creating table election  
*** Checking table persongroup ***  
Creating table persongroup  
*** Checking table sipd_config ***  
Creating table sipd_config  
*** Checking table ssl_config ***  
Creating table ssl_config  
-- createdb is complete  
-- *IMPORTANT*: Adding administrator [email protected] with password root  
-- Database is successfully initialized.  
MYSQL host is localhost  
MYSQL user is root  
Enter the IP address of the VCX Data Server: 10.20.30.41  
Enter the IP address of the VCX data server that contains the global  
directory of users to be downloaded to this IP Conferencing Module.  
Enter the username for VCX DB Sync: vcx  
Enter the username for VCX database synchronization.  
Enter the password for VCX DB Sync: vcx  
Enter the password for VCX database synchronization. The password  
does not echo on the screen.  
Do users on this VCX have their home presence server on this installation (y/n)?[y]:  
Assuming the default value as y  
Enter no [n] if the VCX data server containing the global directory of users  
(see above) is not a local VCX for this installation.  
# 10.20.30.40 SSH-1.99-OpenSSH_3.6.1p2  
# 10.20.30.40 SSH-1.99-OpenSSH_3.6.1p2  
OK  
now testing if we can connect to the 10.20.30.41  
vcx  
updating the configuration database entries  
3Com IP Conferencing Module applications will be automatically restarted when  
system reboots  
-- Installing SIP Conferencing servers ...  
 
Multiple Server Initial Installation  
79  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.5.21.  
restarting httpd...  
Creating a directory client_config to hold the soft client  
autoconfiguration files...  
Directory created successfully at  
/opt/3com/components/presconf.2.5.21/client_config  
Any files that you store in this directory are accessible via  
http://master.yourcompany.com/3c3/<CONFIGFILENAME>.xml  
If you have not already entered the license string during installation  
you must do so from the web interface before trying to run any  
application in 3Com software.  
You may start, stop and monitor the 3Com IP Conferencing Module applications using  
the following command(s):  
> service <application> start|stop|status|restart  
Else, you may do so using the web interface.  
Your installation is complete.  
To add new user or to change your profile visit appropriate  
URL corresponding to /opt/3com/components/presconf.2.5.3/gui.  
Once again, Please report any installation problem to  
"3Com Support" <[email protected]>  
****************************************************  
* Output, from this install session, was saved to:  
* /opt/3com/components/presconf.2.5.3/install_log.Dec_07_2005  
****************************************************  
Would you like to start the 3Com IP Conferencing Module services now?  
(N/Y) [N]: y  
Select “Y” to complete the installation and start the services.  
Starting VCX Services:  
Starting vcx/mysql:  
[ OK ]  
Starting vcx/db_watchdog: Starting Darabase Watchdog: Missing database  
configuration file; cannot continue.  
[FAILED]  
Starting vcx/sippeng:  
Starting vcx/vcxdb:  
[ OK ]  
[ OK ]  
Started VCX Services: 3 started, 1 failed to start  
 
80  
CHAPTER 2: INSTALLATION SCRIPTS  
All services will start except DB_watchdog. It starts after the secondary  
server is installed and the database replication process is initiated.  
End of IP Conferencing Module Configuration  
Sample vcx-setup This script programs the secondary server in a multiple server  
Script (Secondary configuration. The slave database is installed and initially hosted on the  
server) secondary server.  
The following options are selected in this sample script:  
n
Data server for presence and conferencing configuration (installs the  
conference & presence database)  
n
Slave database configuration.  
The vcx-setup script displays the current settings and then asks you if you  
want to accept or update them. Sample answers are provided in bold  
type along with explanations of those answers. Explanations are in italics.  
To run the vcx-setup script:  
1 Log in to the server as root.  
2 Enter a password (default is pvadmin).  
3 Press Enter (or Return).  
-bash-2.05b# vcx-setup  
Enter vcx-setup at the command prompt.  
---------------------------------------------------------------------------  
---------- Welcome to the VCX Linux Network Configuration Wizard ----------  
---------------------------------------------------------------------------  
This wizard sets up networking and related services.  
Start of Network Configuration  
Configure networking now? [yes] :  
Press the Enter or Return key to accept yes as the suggested answer.  
--------- Configuring Dynamic Host Configuration Protocol (DHCP) ----------  
VCX servers can use DHCP for automated configuration, but this requires  
that the DHCP server is configured to provide the proper options. Unless  
you know that your environment is set up in this way, you should say 'no'  
here and configure static network parameters.  
 
     
Multiple Server Initial Installation  
81  
Use DHCP on eth0 to configure network parameters? [no] :  
---------- Configuring Hostname ----------  
Enter system hostname [localhost] : slave.yourcompany.com  
---------- Configuring IP Interface 'eth0' ----------  
Enter IP Address  
Enter Network Subnet Mask  
[192.168.1.100 ] : 10.20.30.61  
[255.255.255.0 ] : 255.255.255.0  
Enter Default Gateway Address [10.20.30.254 ] : 10.20.30.254  
---------- Configuring IP Interface 'eth1' ----------  
Interface State  
: disabled  
Note that ‘eth1’ is not used for the 3Com IP Conferencing Module.  
---------- Configuring DNS Servers ----------  
Enter DNS servers one at a time.  
When done, enter 0.0.0.0 to stop.  
Primary DNS Server [192.168.1.1] : 10.25.10.31  
Secondary DNS Server [192.168.1.2] : 10.26.10.31  
Tertiary DNS Server [0.0.0.0] : 0.0.0.0  
---------- Configuring DNS Search Path ----------  
Press Enter to leave the current path unchanged, or specify  
a new search path, with spaces separating each entry.  
DNS Search Path []: yourcompany.com  
---------- Configuring Network Time Protocol ----------  
Enter NTP servers one at a time.  
When done, enter 0.0.0.0 to stop.  
Primary NTP Server [192.168.1.253] : 10.35.10.51  
Secondary NTP Server [192.168.1.252] : 10.36.10.51  
Additional NTP Server : 10.1.0.3  
-------------------------- Configuring Time Zone --------------------------  
Please select a geographic location from the following list:  
1. Africa  
2. Americas  
3. Antarctica  
4. Arctic Ocean  
5. Asia  
6. Atlantic Ocean  
7. Australia  
 
82  
CHAPTER 2: INSTALLATION SCRIPTS  
8. Europe  
9. Indian Ocean  
10. Pacific Ocean  
Enter continent [2] :  
Press the Enter or Return key to accept 2 as the suggested answer.  
Please select a country from the following list:  
1. Antigua & Barbuda  
2. Anguilla  
18. Ecuador  
19. Grenada  
35. Panama  
36. Peru  
3. Netherlands Antilles 20. French Guiana  
37. St Pierre & Miquelon  
38. Puerto Rico  
39. Paraguay  
4. Argentina  
5. Aruba  
6. Barbados  
7. Bolivia  
21. Greenland  
22. Guadeloupe  
23. Guatemala  
24. Guyana  
40. Suriname  
41. El Salvador  
42. Turks & Caicos Is  
43. Trinidad & Tobago  
44. United States  
45. Uruguay  
46. St Vincent  
47. Venezuela  
48. Virgin Islands (UK)  
49. Virgin Islands (US)  
8. Brazil  
9. Bahamas  
25. Honduras  
26. Haiti  
10. Belize  
27. Jamaica  
11. Canada  
12. Chile  
28. St Kitts & Nevis  
29. Cayman Islands  
30. St Lucia  
31. Martinique  
32. Montserrat  
33. Mexico  
13. Colombia  
14. Costa Rica  
15. Cuba  
16. Dominica  
17. Dominican Republic  
Enter country [44] :  
34. Nicaragua  
Press the Enter or Return key to accept 44 as the suggested answer.  
Please select a time zone from the following list:  
1. Alaska Time  
2. Alaska Time - Alaska panhandle  
3. Alaska Time - Alaska panhandle neck  
4. Alaska Time - west Alaska  
5. Aleutian Islands  
6. Central Time  
7. Central Time - Michigan - Wisconsin border  
8. Central Time - North Dakota - Oliver County  
9. Eastern Standard Time - Indiana - Crawford County  
10. Eastern Standard Time - Indiana - Starke County  
11. Eastern Standard Time - Indiana - Switzerland County  
12. Eastern Standard Time - Indiana - most locations  
13. Eastern Time  
14. Eastern Time - Kentucky - Louisville area  
15. Eastern Time - Kentucky - Wayne County  
16. Eastern Time - Michigan - most locations  
17. Hawaii  
 
Multiple Server Initial Installation  
83  
18. Mountain Standard Time - Arizona  
19. Mountain Time  
20. Mountain Time - Navajo  
21. Mountain Time - south Idaho & east Oregon  
22. Pacific Time  
Enter zone [13] :  
Selected Time Zone:  
America/New_York  
-------------------------- CONFIGURATION SUMMARY --------------------------  
DHCP state: disabled  
Hostname: slave.yourcompany.com  
IP Interfaces: Device  
IP Address  
10.20.30.60  
(interface is disabled)  
Network Mask  
255.255.0.0  
Default Gateway  
10.20.30.254  
eth0  
eth1  
DNS Servers:  
10.25.10.31  
10.26.10.31  
Search Domains:yourcompany.com  
NTP Servers:  
10.35.10.51  
10.36.10.51  
10.1.0.3  
Time Zone:  
America/New_York  
---------------------------------------------------------------------------  
Is all of the above information correct? [yes] :  
---------------------------------------------------------------------------  
---------------------------------------------------------------------------  
Please wait while the wizard completes.  
Saving configuration...Done.  
End of Network Configuration  
The network configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-config-network -wizard.  
Start of System Configuration  
After successful completion of the network configuration, the script will  
prompt you to select a set of services.  
 
 
84  
CHAPTER 2: INSTALLATION SCRIPTS  
----------------------- Select System Configuration -----------------------  
Individual systems may provide various services in a VCX installation.You  
must select the appropriate set of services which this system is to  
provide. Be certain that the selection corresponds to the functionality  
you have purchased.  
Which services will this system provide?  
1. Presence and Conference - all in one  
2. Conferencing server  
3. Conferencing and database server  
4. Data server for presence and conferencing  
5. Presence server (with database)  
Enter your choice (1-5) : 4  
Select “4” to install the following components:  
- conference & presence database.  
You have chosen to configure this system to provide:  
Data server for presence and conferencing  
Note that in order for these services to work, you must have purchased an  
appropriate license and installed the corresponding license activation key  
on this system.  
*** WARNING *** Once you confirm your selection, you cannot change it.  
Are you absolutely certain that you wish to configure this system as an  
'Data server for presence and conferencing' server? If you answer 'no'  
here you can choose an alternative configuration.  
Confirm selection? [no] : y  
Selection confirmed.  
*** Assembling VCX.2.9.21 using 'VSBOM.xml' ***  
*** Processing components ***  
*** Executing assembly commands ***  
*** Assembly complete ***  
The VCX assembly has been created. Preparing system for use:  
 
Multiple Server Initial Installation  
85  
Performing early startup tasks:  
Starting VCX-Firewall:  
Starting httpd:  
[ OK ]  
[ OK ]  
Removing unneeded application components from the system.  
This may take several minutes. Please wait while the operation completes.  
Determining which packages are not used by any VCX version:  
oem.7.0.1  
: [REMOVE]  
presconf.2.5.21  
: [keep; used in 2.9.21]  
: [REMOVE]  
: [REMOVE]  
: [REMOVE]  
: [REMOVE]  
presconf-conf.2.5.21  
presconf-presence.2.5.21  
presconf-vcxdb.2.5.21  
presconf-web.2.5.21  
vcx-firewall.1.5.6  
mysql.3.23.58  
: [keep; used in 2.9.21]  
: [keep; used in 2.9.21]  
Removing packages:  
oem-a-7.0.1-2  
: [OK]  
: [OK]  
: [OK]  
: [OK]  
: [OK]  
presconf-conf-2.5.21-1  
presconf-presence-2.5.21-1  
presconf-vcxdb-2.5.21-1  
presconf-web-2.5.21-1  
Successfully removed extra packages.  
End of System Configuration  
The system configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-setconfigtype.  
Start of E-mail (sSMTP) Configuration  
After successful completion of the system configuration, the script will  
prompt you to set up the e-mail notification utility. The utility sends  
e-mails when conferences are created and modified, and when users  
attempt to add contacts to their buddy lists. E-mail notification works  
once users have added their e-mail addresses to the 3Com IP  
Conferencing Module.  
Configuration for sSMTP  
(1) mailhub  
 
 
86  
CHAPTER 2: INSTALLATION SCRIPTS  
This is the computer responsible for handling your outgoing mail. It could be the  
SMTP server of your ISP, or a departmental mailhub. Use the fully-qualified domain  
name (foo.bar.baz) of the mailhub; if it uses an unusual SMTP port number, use the  
colon syntax  
foo.bar.baz:2525  
Otherwise sSMTP will use the standard SMTP port number (25).  
(Note that sSMTP can support a user-dependent mailhub with the'reverse aliases'  
feature, for which see the man page.)  
Please enter your mailhub []: mail.yourcompany.com  
Enter the fully qualified domain name of the computer handling outgoing  
mail.  
(2) FromLineOverride  
This specifies how sSMTP handles the From: line of outgoing mail. If  
FromLineOverride=YES, sSMTP will leave the From: line alone if it already exists.  
If FromLineOverride has any other value, or there is no From: line, sSMTP creates  
the From: line using your username (or the -f command-line option), and the value of  
the rewriteDomain option (step (4), below). If you use a mail user agent (MUA; e.g.  
mutt, pine) I recommend using YES and having the MUA set the From: line.  
(Exception: the 'reverse aliases' feature can be used to set up a particular From:  
address for each user, in which case don't use FromLineOverride=YES. See the man  
page.)  
FromLineOverride? [YES]:  
Specify how sSMTP handles the From: line of outgoing mail.  
(3) hostname  
sSMTP uses the hostname of your computer to identify itself to the mailhub, and in  
the Received: headers of the outgoing mail. This has relatively little effect on how  
the mail is handled. Use the fully-qualified domain name (FQDN) of your  
computer(foo.bar.baz). If it doesn't have a FQDN, use some name for your box.  
Hostname of your box [slave.yourcompany.com]:  
Enter the host name of your computer handling outgoing mail.  
(4) rewriteDomain  
Please enter the mail name of your system.  
sSMTP uses this value to add a domain to unqualified e-mail addresses(addresses  
without an @-sign).  
You probably want to use the domain from your own e-mail address.You probably want  
to set up your MUA to handle unqualified addresses itself, in which case sSMTP will  
never have to use this.  
Mail name [slave.yourcompany.com]:yourcompany.com  
 
Multiple Server Initial Installation  
87  
Enter the mail name of your system.  
(5) root  
Last and least: if sSMTP finds an unqualified e-mail address among the recipients,  
and it corresponds to a username on your local machine with a userid less than 1000,  
then the e-mail is sent to this value instead. The idea is that mail sent to 'root'  
should probably go to 'postmaster' instead.  
If you set up your MUA to do its own handling of unqualified  
addresses, this is irrelevant. Use the default value of 'postmaster' or your own  
e-mail address if you're paranoid.  
System users receive mail at [postmaster]:postmaster  
Enter the system user e-mail address.  
Note: check with your e-mail administrator for the proper system user  
e-mail address.  
Wrote configuration file /etc/ssmtp/ssmtp.conf  
Starting mysqld daemon with databases from /opt/3comdata/mysql  
Tcl is already installed  
Tcl version is 8.3  
Please report any installation problem to  
"3Com Support" <[email protected]>  
End of E-mail (sSMTP) Configuration  
The e-mail configuration is complete. If necessary, you can re-run this  
portion of the script by entering usr/sbin/smtp-configure.  
Start of Database Configuration  
After successful completion of the e-mail configuration, the script will  
prompt you to select a database configuration.  
There are different ways to install and access the database.  
1 Local Master: this server will have the master database.  
2 Local Slave: this server will have a slave database.  
3 Remote database: database is on another server.  
Please choose one of the above options: 2  
Select “2” to specify that this server will initially host the slave database as  
the secondary server in a distributed system.  
Available applications:  
 
 
88  
CHAPTER 2: INSTALLATION SCRIPTS  
End of Database Configuration  
The database configuration is complete. If necessary, you can re-run this  
portion of the script by entering presconf-setup.  
Start of IP Conferencing Module Configuration  
After successful completion of the database configuration, the script will  
prompt you to select an initial configuration.  
Enter the fully qualified hostname for this installation.  
[slave.yourcompany.com]:  
Assuming default value as slave.yourcompany.com  
Enter the fully qualified hostname of the machine you are installing on.  
Assuming the userid of the administrator who will manage the  
applications for your domain is root  
Enter the administrator's email address. [[email protected]]:  
Assuming default value as [email protected]  
Enter the administrator’s e-mail address. The default is derived from the  
hostname defined in the network configuration (above).  
If the system is configured to send e-mail notification of conference  
events to users, the e-mails will appear to be sent from the administrator  
(sipadmin@yourcompany.com). Note that some mail agents may require  
this to be a valid e-mail address.  
Host Identifier (hostid) of this machine is: 75896dc20fa90922ddbb2b81  
Please send an email to [email protected] to receive an activation key to activate  
this product.  
Please enter the software activation keys one by one; end with an empty line:  
Send the host ID to 3Com, which will use it to generate your activation  
keys. Once 3Com has returned the activation keys to you, you can paste  
them into the install session when prompted.  
The activation keys are validated as they are entered. If validation is  
successful, the keys will be stored in a license file and the installation  
session will continue. If validation is unsuccessful, the installation session  
will be aborted.  
 
 
Multiple Server Initial Installation  
89  
Enter key:  
sippeng:master.yourcompany.com:+:-:-:-:5ea71ce717ea55627152a1db82d54592  
key ok for sippeng  
Enter key:  
License file name: /opt/3com/components/presconf.2.5.21/presconf_licenses  
Enter the mysql user name for accessing the master database.[root]:  
Assuming default value as root  
Enter the host name on which the master database is running. []:  
master.yourcompany.com  
Enter the host name of the master (primary) server.  
Enter the mysql password for user root at master.yourcompany.com. [NULL]:  
Assuming default value as NULL  
The command scripts/remote_access.sh needs to be run on the master server to allow  
access to this server. Has this been done? y/n: y  
To allow access to the secondary server:  
1. Open a command window on the the master (primary) server  
2. Run remote_access.sh <secondary-server hostname | IP>  
3. When prompted, enter the password for the slave (secondary) server  
(default is pvadmin)  
4. Return to the slave (secondary) server and enter “Y” at the prompt.  
Please enable remote access to the master server by providing the root password for  
master.yourcompany.com  
REMOTE is at master.yourcompany.com  
Enter the password for [email protected]: pvadmin  
Enter the password for the master (primary) server.  
# master.yourcompany.com SSH-1.99-OpenSSH_3.6.1p2  
# master.yourcompany.com SSH-1.99-OpenSSH_3.6.1p2  
Warning: Permanently added the RSA host key for IP address '10.1.0.249' to the list  
of known hosts.  
[email protected]'s password:  
OK  
now testing if we can connect to master.yourcompany.com  
SUCCESS  
Continuing slave database installation...  
Master server hostname is <master.yourcompany.com>  
Enter the fully qualified host name or IP address for the slave server. Default  
[presconf1.yourcompany.com]:  
Assuming default value as presconf1.yourcompany.com  
 
90  
CHAPTER 2: INSTALLATION SCRIPTS  
Creating cinema_db2.conf on master database server  
On master database server copy cinema_db.conf to cinema_db1.conf  
In my.cnf on master, ensure server-id exists and binary logging is enabled.  
MySQL my.cnf files updated. Copying modified my.cnf file back to master database  
server  
Grant access to master database from this server  
Opening slave database.  
On slave run mysql CHANGE MASTER and have it point to the master db.  
Enter the mysql replication password for this installation (both master and slave)  
On slave GRANT ACCESS to the master database using the replication password  
Create the SIP database now to avoid errors with mysqldump later on  
Allow access to the mysql port through the firewall for both master and slave  
Opening master database.  
Run mysql CHANGE MASTER and have it point to the slave db.  
On master GRANT ACCESS to the slave database using the replication password  
Insert a record for the new database into dbservers table on master database.  
Restart the slave database.  
060112 10:56:27 mysqld ended  
Slave database successfully installed.  
Call make_slave.sh to dump the master database and start replication.  
Check if watchdog is already running  
Watchdog is not running - starting it  
Watchdog is running  
Ensure watchdog is running on master database server.  
db_watchdog is probably not running on master.yourcompany.com. Try starting it.  
db_watchdog successfully started on master.yourcompany.com  
Slave successfully installed  
-- Creating cinema_db.conf  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.5.21 to  
755.  
-- Trying to load fbsql.so...  
-- fbsql is loaded...  
-- Opening the database sql://root:[email protected]/mysql  
-- Changing permissions for presconf1.yourcompany.com  
-- Changing permissions for master.yourcompany.com  
-- Changing permissions for presconf1.yourcompany.com  
-- Changing permissions for presconf1.yourcompany.com  
-- Flushing privleges  
-- Opening the database sql://root:[email protected]/mysql  
-- Database is successfully initialized.  
3Com IP Conferencing Module applications will be automatically restarted when  
system reboots  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.5.21.  
 
Multiple Server Initial Installation  
91  
restarting httpd...  
Creating a directory client_config to hold the soft client  
autoconfiguration files...  
Directory created successfully at  
/opt/3com/components/presconf.2.5.21/client_config  
Any files that you store in this directory are accessible via  
http://presconf1.yourcompany.com/3c3/<CONFIGFILENAME>.xml  
If you have not already entered the license string during installation  
you must do so from the web interface before trying to run any  
application in 3Com software.  
You may start, stop and monitor the 3Com IP Conferencing Module applications using  
the following command(s):  
> service <application> start|stop|status|restart  
Else, you may do so using the web interface.  
Your installation is complete.  
To add new user or to change your profile visit appropriate  
URL corresponding to /opt/3com/components/presconf.2.5.21/gui.  
Once again, Please report any installation problem to  
"3Com Support" <[email protected]>  
****************************************************  
* Output, from this install session, was saved to:  
* install_log.Jan_12_2006  
****************************************************  
Would you like to start the 3Com IP Conferencing Module services now?  
(N/Y) [N]: y  
Select “Y” to complete the installation and start the services.  
Starting VCX Services:  
Starting vcx/mysql:  
Starting vcx/db_watchdog:  
Started VCX Services: 2 started.  
[ OK ]  
[ OK ]  
All services will start.  
 
92  
CHAPTER 2: INSTALLATION SCRIPTS  
End of IP Conferencing Module Configuration  
Sample vcx-setup This section contains a sample of the vcx-setup script for the conference  
Script (Conference servers in a multiple server configuration that has between four and  
server) twelve servers.  
In a multiple server configuration, up to ten servers can host conferences.  
Two others (the primary and secondary servers) must be dedicated to  
hosting the redundant database.  
The following options are selected in this sample script:  
n
Conferencing server configuration (conference server and conference  
attendant server)  
To run the vcx-setup script:  
1 Log in to the server as root.  
2 Enter a password (default is pvadmin).  
3 Press Enter (or Return).  
-bash-2.05b# vcx-setup  
Enter vcx-setup at the command prompt.  
---------------------------------------------------------------------------  
---------- Welcome to the VCX Linux Network Configuration Wizard ----------  
---------------------------------------------------------------------------  
This wizard sets up networking and related services.  
Start of Network Configuration  
Configure networking now? [yes] :  
Press the Enter or Return key to accept yes as the suggested answer.  
--------- Configuring Dynamic Host Configuration Protocol (DHCP) ----------  
VCX servers can use DHCP for automated configuration, but this requires  
that the DHCP server is configured to provide the proper options. Unless  
you know that your environment is set up in this way, you should say 'no'  
here and configure static network parameters.  
Use DHCP on eth0 to configure network parameters? [no] :  
---------- Configuring Hostname ----------  
Enter system hostname [localhost] : conf.yourcompany.com  
 
     
Multiple Server Initial Installation  
93  
---------- Configuring IP Interface 'eth0' ----------  
Enter IP Address  
Enter Network Subnet Mask  
[192.168.1.100 ] : 10.20.30.62  
[255.255.255.0 ] : 255.255.255.0  
Enter Default Gateway Address [10.20.30.254 ] : 10.20.30.254  
---------- Configuring IP Interface 'eth1' ----------  
Interface State  
: disabled  
Note that ‘eth1’ is not used for the 3Com IP Conferencing Module.  
---------- Configuring DNS Servers ----------  
Enter DNS servers one at a time.  
When done, enter 0.0.0.0 to stop.  
Primary DNS Server [192.168.1.1] : 10.25.10.31  
Secondary DNS Server [192.168.1.2] : 10.26.10.31  
Tertiary DNS Server [0.0.0.0] : 0.0.0.0  
---------- Configuring DNS Search Path ----------  
Press Enter to leave the current path unchanged, or specify  
a new search path, with spaces separating each entry.  
DNS Search Path []: yourcompany.com  
---------- Configuring Network Time Protocol ----------  
Enter NTP servers one at a time.  
When done, enter 0.0.0.0 to stop.  
Primary NTP Server [192.168.1.253] : 10.35.10.51  
Secondary NTP Server [192.168.1.252] : 10.36.10.51  
Additional NTP Server : 10.1.0.3  
-------------------------- Configuring Time Zone --------------------------  
Please select a geographic location from the following list:  
1. Africa  
2. Americas  
3. Antarctica  
4. Arctic Ocean  
5. Asia  
6. Atlantic Ocean  
7. Australia  
8. Europe  
9. Indian Ocean  
10. Pacific Ocean  
Enter continent [2] :  
 
94  
CHAPTER 2: INSTALLATION SCRIPTS  
Press the Enter or Return key to accept 2 as the suggested answer.  
Please select a country from the following list:  
1. Antigua & Barbuda  
2. Anguilla  
18. Ecuador  
19. Grenada  
35. Panama  
36. Peru  
3. Netherlands Antilles 20. French Guiana  
37. St Pierre & Miquelon  
38. Puerto Rico  
39. Paraguay  
4. Argentina  
5. Aruba  
6. Barbados  
7. Bolivia  
21. Greenland  
22. Guadeloupe  
23. Guatemala  
24. Guyana  
40. Suriname  
41. El Salvador  
42. Turks & Caicos Is  
43. Trinidad & Tobago  
44. United States  
45. Uruguay  
46. St Vincent  
47. Venezuela  
48. Virgin Islands (UK)  
49. Virgin Islands (US)  
8. Brazil  
9. Bahamas  
25. Honduras  
26. Haiti  
10. Belize  
27. Jamaica  
11. Canada  
12. Chile  
28. St Kitts & Nevis  
29. Cayman Islands  
30. St Lucia  
31. Martinique  
32. Montserrat  
33. Mexico  
13. Colombia  
14. Costa Rica  
15. Cuba  
16. Dominica  
17. Dominican Republic  
Enter country [44] :  
34. Nicaragua  
Press the Enter or Return key to accept 44 as the suggested answer.  
Please select a time zone from the following list:  
1. Alaska Time  
2. Alaska Time - Alaska panhandle  
3. Alaska Time - Alaska panhandle neck  
4. Alaska Time - west Alaska  
5. Aleutian Islands  
6. Central Time  
7. Central Time - Michigan - Wisconsin border  
8. Central Time - North Dakota - Oliver County  
9. Eastern Standard Time - Indiana - Crawford County  
10. Eastern Standard Time - Indiana - Starke County  
11. Eastern Standard Time - Indiana - Switzerland County  
12. Eastern Standard Time - Indiana - most locations  
13. Eastern Time  
14. Eastern Time - Kentucky - Louisville area  
15. Eastern Time - Kentucky - Wayne County  
16. Eastern Time - Michigan - most locations  
17. Hawaii  
18. Mountain Standard Time - Arizona  
19. Mountain Time  
20. Mountain Time - Navajo  
21. Mountain Time - south Idaho & east Oregon  
 
Multiple Server Initial Installation  
95  
22. Pacific Time  
Enter zone [13] :  
Selected Time Zone:  
America/New_York  
-------------------------- CONFIGURATION SUMMARY --------------------------  
DHCP state: disabled  
Hostname: slave.yourcompany.com  
IP Interfaces: Device  
IP Address  
10.20.30.60  
(interface is disabled)  
Network Mask  
255.255.0.0  
Default Gateway  
10.20.30.254  
eth0  
eth1  
DNS Servers:  
10.25.10.31  
10.26.10.31  
Search Domains:yourcompany.com  
NTP Servers:  
10.35.10.51  
10.36.10.51  
10.1.0.3  
Time Zone:  
America/New_York  
---------------------------------------------------------------------------  
Is all of the above information correct? [yes] :  
---------------------------------------------------------------------------  
---------------------------------------------------------------------------  
Please wait while the wizard completes.  
Saving configuration...Done.  
End of Network Configuration  
The network configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-config-network -wizard.  
Start of System Configuration  
After successful completion of the network configuration, the script will  
prompt you to select a set of services.  
----------------------- Select System Configuration -----------------------  
Individual systems may provide various services in a VCX installation.You  
must select the appropriate set of services which this system is to  
 
 
96  
CHAPTER 2: INSTALLATION SCRIPTS  
provide. Be certain that the selection corresponds to the functionality  
you have purchased.  
Which services will this system provide?  
1. Presence and Conference - all in one  
2. Conferencing server  
3. Conferencing and database server  
4. Data server for presence and conferencing  
5. Presence server (with database)  
Enter your choice (1-5) : 2  
Select “2” to install the following components:  
- conference server  
- conference attendant server.  
You have chosen to configure this system to provide:  
Conferencing server  
Note that in order for these services to work, you must have purchased an  
appropriate license and installed the corresponding license activation key  
on this system.  
*** WARNING *** Once you confirm your selection, you cannot change it.  
Are you absolutely certain that you wish to configure this system as an  
'Data server for presence and conferencing' server? If you answer 'no'  
here you can choose an alternative configuration.  
Confirm selection? [no] : y  
Selection confirmed.  
*** Assembling VCX.2.9.21 using 'VSBOM.xml' ***  
*** Processing components ***  
*** Executing assembly commands ***  
*** Assembly complete ***  
The VCX assembly has been created. Preparing system for use:  
Performing early startup tasks:  
Starting VCX-Firewall:  
Starting httpd:  
[ OK ]  
[ OK ]  
 
Multiple Server Initial Installation  
97  
Removing unneeded application components from the system.  
This may take several minutes. Please wait while the operation completes.  
Determining which packages are not used by any VCX version:  
callprocessor.7.0.13  
devapp.7.0.13.14  
devboot.5_0_0_C  
devdnldsvr.07.00.05.06  
oem.7.0.1  
: [skipped; unknown package]  
: [skipped; unknown package]  
: [skipped; unknown package]  
: [skipped; unknown package]  
: [REMOVE]  
presconf.2.5.21  
presconf-conf.2.5.21  
presconf-presence.2.5.21  
presconf-vcxdb.2.5.21  
presconf-web.2.5.21  
vcx-firewall.1.5.6  
ACE.5.3.6  
: [keep; used in 2.9.21]  
: [keep; used in 2.9.21]  
: [REMOVE]  
: [REMOVE]  
: [REMOVE]  
: [keep; used in 2.9.21]  
: [skipped; unknown package]  
: [REMOVE]  
mysql.3.23.58  
oracle.9.2.0.4  
STLport.4.6.1  
xerces.c1_5_1  
: [skipped; unknown package]  
: [skipped; unknown package]  
: [skipped; unknown package]  
Removing packages:  
oem-a-7.0.1-2  
: [OK]  
: [OK]  
: [OK]  
: [OK]  
: [OK]  
presconf-presence-2.5.21-1  
presconf-vcxdb-2.5.21-1  
presconf-web-2.5.21-1  
mysql-3.23.58-1  
Successfully removed extra packages.  
End of System Configuration  
The system configuration is complete. If necessary, you can re-run this  
portion of the script by entering vcx-setconfigtype.  
Start of E-mail (sSMTP) Configuration  
After successful completion of the system configuration, the script will  
prompt you to set up the e-mail notification utility. The utility sends  
e-mails when conferences are created and modified, and when users  
attempt to add contacts to their buddy lists. E-mail notification works  
 
 
98  
CHAPTER 2: INSTALLATION SCRIPTS  
once users have added their e-mail addresses to the 3Com IP  
Conferencing Module.  
Configuration for sSMTP  
(1) mailhub  
This is the computer responsible for handling your outgoing mail. It could be the  
SMTP server of your ISP, or a departmental mailhub. Use the fully-qualified domain  
name (foo.bar.baz) of the mailhub; if it uses an unusual SMTP port number, use the  
colon syntax  
foo.bar.baz:2525  
Otherwise sSMTP will use the standard SMTP port number (25).  
(Note that sSMTP can support a user-dependent mailhub with the'reverse aliases'  
feature, for which see the man page.)  
Please enter your mailhub []: mail.yourcompany.com  
Enter the fully qualified domain name of the computer handling outgoing  
mail.  
(2) FromLineOverride  
This specifies how sSMTP handles the From: line of outgoing mail. If  
FromLineOverride=YES, sSMTP will leave the From: line alone if it already exists.  
If FromLineOverride has any other value, or there is no From: line, sSMTP creates  
the From: line using your username (or the -f command-line option), and the value of  
the rewriteDomain option (step (4), below). If you use a mail user agent (MUA; e.g.  
mutt, pine) I recommend using YES and having the MUA set the From: line.  
(Exception: the 'reverse aliases' feature can be used to set up a particular From:  
address for each user, in which case don't use FromLineOverride=YES. See the man  
page.)  
FromLineOverride? [YES]:  
Specify how sSMTP handles the From: line of outgoing mail.  
(3) hostname  
sSMTP uses the hostname of your computer to identify itself to the mailhub, and in  
the Received: headers of the outgoing mail. This has relatively little effect on how  
the mail is handled. Use the fully-qualified domain name (FQDN) of your  
computer(foo.bar.baz). If it doesn't have a FQDN, use some name for your box.  
Hostname of your box [slave.yourcompany.com]:  
Enter the host name of your computer handling outgoing mail.  
(4) rewriteDomain  
Please enter the mail name of your system.  
sSMTP uses this value to add a domain to unqualified e-mail addresses(addresses  
without an @-sign).  
 
Multiple Server Initial Installation  
99  
You probably want to use the domain from your own e-mail address.You probably want  
to set up your MUA to handle unqualified addresses itself, in which case sSMTP will  
never have to use this.  
Mail name [slave.yourcompany.com]:yourcompany.com  
Enter the mail name of your system.  
(5) root  
Last and least: if sSMTP finds an unqualified e-mail address among the recipients,  
and it corresponds to a username on your local machine with a userid less than 1000,  
then the e-mail is sent to this value instead. The idea is that mail sent to 'root'  
should probably go to 'postmaster' instead.  
If you set up your MUA to do its own handling of unqualified  
addresses, this is irrelevant. Use the default value of 'postmaster' or your own  
e-mail address if you're paranoid.  
System users receive mail at [postmaster]:postmaster  
Enter the system user e-mail address.  
Note: check with your e-mail administrator for the proper system user  
e-mail address.  
Wrote configuration file /etc/ssmtp/ssmtp.conf  
Starting mysqld daemon with databases from /opt/3comdata/mysql  
Tcl is already installed  
Tcl version is 8.3  
Please report any installation problem to  
"3Com Support" <[email protected]>  
End of E-mail (sSMTP) Configuration  
The e-mail configuration is complete. If necessary, you can re-run this  
portion of the script by entering usr/sbin/smtp-configure.  
Start of Database Configuration  
After successful completion of the e-mail configuration, the script will  
prompt you to select a database configuration.  
There are different ways to install and access the database.  
1 Local Master: this server will have the master database.  
2 Local Slave: this server will have a slave database.  
 
 
100  
CHAPTER 2: INSTALLATION SCRIPTS  
3 Remote database: database is on another server.  
Please choose one of the above options: 3  
Select “3” to specify that this server will not host a database (all servers  
except the primary and secondary servers in a distributed system).  
Available applications:  
End of Database Configuration  
The database configuration is complete. If necessary, you can re-run this  
portion of the script by entering presconf-setup.  
Start of IP Conferencing Module Configuration  
After successful completion of the database configuration, the script will  
prompt you to select an initial configuration.  
Enter the fully qualified hostname for this installation.  
[slave.yourcompany.com]:  
Assuming default value as conf.yourcompany.com  
Enter the fully qualified hostname of the machine you are installing on.  
Assuming the userid of the administrator who will manage the 3Com applications for  
your domain is root  
Enter the administrator's email address. [[email protected]]:  
Assuming default value as [email protected]  
Enter the administrator’s e-mail address. The default is derived from the  
hostname defined in the network configuration (above).  
If the system is configured to send e-mail notification of conference  
events to users, the e-mails will appear to be sent from the administrator  
(sipadmin@yourcompany.com). Note that some mail agents may require  
this to be a valid e-mail address.  
Host Identifier (hostid) of this machine is: 75896dc20fa90922ddbb2b81  
Please send an email to [email protected] to receive an activation key to activate  
this product.  
Please enter the software activation keys one by one; end with an empty line:  
 
 
Multiple Server Initial Installation 101  
Send the host ID to 3Com, which will use it to generate your activation  
keys. Once 3Com has returned the activation keys to you, you can paste  
them into the install session when prompted.  
The activation keys are validated as they are entered. If validation is  
successful, the keys will be stored in a license file and the installation  
session will continue. If validation is unsuccessful, the installation session  
will be aborted.  
Enter key:  
sipconf:conf.yourcompany.com:+:-:-:150-30-1-1-1:9feb3ec5f5396a76328a01722602f42b  
key ok for sipconf  
Enter key:  
sipvxml:conf.yourcompany.com:+:-:-:30-10:ed52ae38341b4d74c7730d13dc9dc0a7  
key ok for sipvxml  
Enter key:  
License file name: /opt/3com/components/presconf.2.5.21/presconf_licenses  
Validating the license for sipconf application ...  
The license key  
sipconf:conf.yourcompany.com:+:-:-:150-30-1-1-1:9feb3ec5f5396a76328a01722602f42b is  
valid  
Validating the license for sipvxml application ...  
The license key  
sipvxml:conf.yourcompany.com:+:-:-:30-10:ed52ae38341b4d74c7730d13dc9dc0a7 is valid  
Enter the mysql user name for accessing the master database.[root]:  
Assuming default value as root  
Enter the host name on which the master database is running. []:  
master.yourcompany.com  
Enter the host name of the master (primary) server.  
Enter the mysql password for user root at master.yourcompany.com. [NULL]:  
Assuming default value as NULL  
The command scripts/remote_access.sh needs to be run on the master server to allow  
access to this server. Has this been done? y/n: y  
To allow access to the conference server from the master (primary) server:  
1. Open a command window on the the master (primary) server  
2. Run remote_access.sh <conf-server hostname | IP>  
3. When prompted, enter the password for the conference server (default  
is pvadmin)  
 
102  
CHAPTER 2: INSTALLATION SCRIPTS  
To allow access to the conference server from the slave (secondary)  
server:  
1. Open a command window on the the slave (secondary) server  
2. Run remote_access.sh <conf-server hostname | IP>  
3. When prompted, enter the password for the conference server (default  
is pvadmin)  
As a final step, return to the conference server and enter “Y” at the  
prompt.  
The SIP conferencing server will be running at conf.yourcompany.com:5060  
The Conference Attendant Server will be running at conf.yourcompany.com:5092  
fbsql is loaded...  
Opening the database sql://root:[email protected]/mysql  
The range of the numeric conference names must be specified  
Enter the minimum value for numeric conference names. [8000]: 7600  
Enter the maximum value for numeric conference names. Note that  
it must have the same number of digits as the minimum value. : 7689  
For conference server, the prefix of ad hoc conference can be specified  
Enter the prefix for ad hoc conference. [96]: 769  
Enter the IP address of the primary dialout proxy:  
Value entered by user is: 10.1.15.5  
Enter the IP address of the primary VCX system used for DTMF dialout  
during conferences.  
Enter the IP address of the secondary dialout proxy:  
Assuming default value as  
Enter the IP address of the secondary VCX system used for DTMF dialout  
during conferences.  
Enter the digitmap for DTMF dialout.[[1-7]XX|9XXXXXXXXXX|91XXXXXXXXX|9011.XT]:  
Assuming default value as [1-7]XX|9XXXXXXXXXX|91XXXXXXXXX|9011.XT  
Enter the digit map used to define the dial plan for DTMF dialout.  
Several lines of text appear before the next prompt.  
-- Creating cinema_db.conf  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.5.21 to  
755.  
 
Multiple Server Initial Installation 103  
-- Trying to load fbsql.so...  
-- fbsql is loaded...  
-- Opening the database sql://root:[email protected]/mysql  
-- Changing permissions for conf.yourcompany.com  
-- Changing permissions for conf.yourcompany.com  
-- Changing permissions for conf.yourcompany.com  
-- Changing permissions for conf.yourcompany.com  
-- Changing permissions for conf.yourcompany.com  
-- Flushing privleges  
-- Opening the database sql://root:[email protected]/mysql  
-- Database is successfully initialized.  
3Com IP Conferencing Module applications will be automatically restarted when  
system reboots  
-- Installing SIP Conferencing servers ...  
-- Changing permissions of all the files in /opt/3com/components/presconf.2.5.21.  
-- Changing owner and permissions of  
/opt/3com/components/presconf.2.5.21/sipconf/sipconf.  
restarting httpd...  
Creating a directory client_config to hold the soft client  
autoconfiguration files...  
Directory created successfully at  
/opt/3com/components/presconf.2.5.21/client_config  
Any files that you store in this directory are accessible via  
http://conf.yourcompany.com/3c3/<CONFIGFILENAME>.xml  
If you have not already entered the license string during installation  
you must do so from the web interface before trying to run any  
application in 3Com software.  
You may start, stop and monitor the 3Com IP Conferencing Module applications using  
the following command(s):  
> service <application> start|stop|status|restart  
Else, you may do so using the web interface.  
Your installation is complete.  
To add new user or to change your profile visit appropriate  
URL corresponding to /opt/3com/components/presconf.2.5.21/gui.  
Once again, Please report any installation problem to  
"3Com Support" <[email protected]>  
****************************************************  
 
104  
CHAPTER 2: INSTALLATION SCRIPTS  
* Output, from this install session, was saved to:  
* install_log.Jan_12_2006  
****************************************************  
Would you like to start the 3Com IP Conferencing Module services now?  
(N/Y) [N]: y  
Starting VCX Services:  
Starting vcx/db_watchdog:  
Starting vcx/confbridge:  
Starting vcx/sipconf:  
Started VCX Services: 3 started.  
-bash-2.05b#  
[ OK ]  
[ OK ]  
[ OK ]  
All services will start.  
End of IP Conferencing Module Configuration  
Post Installation  
Configuration  
Before the 3Com IP Conferencing Module can be used, the VCX system  
must be configured to work with it. The following items must be set up:  
n
Create Routes to the:  
n
Conference Server  
n
Conference Attendant  
n
n
Presence Server Configuration  
Test the E-mail Notification Setup.  
Set up Conference You must program the VCX dial plan with one or more routes to the  
Server Routes conference server pool. If you have only one server (an “all-in-one”  
implementation), then only one route is required. If you have two or more  
servers, then at least two routes are required to provide redundancy. The  
VCX system uses the routes to forward SIP INVITE messages to the  
designated “routing” conference servers, which in turn redirect callers to  
the appropriate “hosting” conference servers.  
Different conference types may require different routes. For example, if  
users dial the prefix 76 to call Ad Hoc conferences and 74 to call other  
conferences, then one route is required for dial pattern 76 and another is  
required for dial pattern 74.  
For information on how to program the VCX dial plan, see the 3Com VCX  
Administration Guide.  
 
       
Post Installation Configuration 105  
To create a route for conferences:  
1 Using a browser, log in to the VCX system as admin (default password is  
besgroup).  
2 Set up a Pattern.  
Pattern Name : 74*  
Pattern Value : 74*  
3 Create an Endpoint for the route.  
Type : Terminal  
Active : Active  
Name : Confser  
Description : Confser  
IP Address : 10.20.30.60  
IP Port : 5060  
4 Create a route.  
Name : Confser  
Code Contact : use default  
Sort Policy : use default  
5 Assign an endpoint to the route created in step 3.  
6 Add a URI Route Map.  
Active : Active  
Name : Confser  
Pattern : 74  
Route : Confser  
Set up Conference You must program the VCX dial plan with one or more routes to the  
Attendant Routes conference attendants in your server pool. If you have only one server (an  
“all-in-one” implementation), then only one route is required. If you have  
two or more servers, then at least two routes are required to provide  
redundancy.  
For information on how to program the VCX dial plan, see the 3Com VCX  
Administration Guide.  
 
   
106  
CHAPTER 2: INSTALLATION SCRIPTS  
In this example, the Conference Attendant can be accessed at extension  
8074.  
To set up the route for the Conference Attendant:  
1 Using a browser, log in to the VCX system as admin (default password is  
besgroup).  
2 Set up a Pattern.  
Pattern Name : 8074  
Pattern Value : 8074  
3 Create an Endpoint for the route.  
Type : Terminal  
Active : Active  
Name : Confser  
Description : Confatt  
IP Address : 10.20.30.60  
IP Port : 5092  
4 Create a route  
Name : Confatt  
Code Contact : use default  
Sort Policy : use default  
5 Assign an endpoint to the route created in step 3.  
6 Add a URI Route Map.  
Active : Active  
Name : Confatt  
Pattern : 8074  
Route : Confatt  
Trusted Host For conferencing and presence to function properly, the following servers  
Configuration must be added as trusted hosts to the VCX system:  
n
n
n
Presence server  
Conference Attendant Server(s)  
Conference Server(s)  
 
   
Post Installation Configuration 107  
To add the Presence and Conference Server(s) to the VCX system as a  
trusted host:  
1 Log in to the VCX as root.  
2 At the prompt, enter:  
cd /opt/3com/VCX/callprocessor/remoteCli/bin/  
./remoteCli -callp  
3 To check a list of the current trusted hosts, enter:  
config cct  
Output similar to the following will appear:  
To add/delete rows for dynamic tables,  
set the RowStatus field along with the key.  
RowStatus values are  
1 (ACTIVE)  
2 (NOT_IN_SERVICE)  
3 (NOT_READY)  
4 (CREATE_AND_GO)  
5 (CREATE_AND_WAIT)  
6 (DESTROY)  
cct  
-Index -RowStatus -TrustedAddress -Netmask  
2
3
5
6
7
8
1
1
1
1
1
1
10.1.0.157  
10.1.1.8  
10.1.0.3  
10.1.4.1  
10.1.1.240  
10.1.0.239  
255.255.255.255  
255.255.255.255  
255.255.255.255  
255.255.255.255  
255.255.255.255  
255.255.255.255  
Review the Index column in the output and choose an unused index; in  
the above example, 1 or 4 or 9 would do.  
4 Enter the following, replacing "9" with your chosen index and  
"10.1.1.1" with the IP address of the trusted host. For example,  
config cct index=9 rowstatus=4 trustedaddress=10.1.1.1  
netmask=255.255.255.255  
5 Verify that you entered the correct information by entering:  
config cct  
Output similar to the following will appear:  
To add/delete rows for dynamic tables,  
set the RowStatus field along with the key.  
RowStatus values are  
 
108  
CHAPTER 2: INSTALLATION SCRIPTS  
1 (ACTIVE)  
2 (NOT_IN_SERVICE)  
3 (NOT_READY)  
4 (CREATE_AND_GO)  
5 (CREATE_AND_WAIT)  
6 (DESTROY)  
cct  
-Index -RowStatus -TrustedAddress -Netmask  
2
3
5
6
7
8
9
1
1
1
1
1
1
1
10.1.0.157  
10.1.1.8  
10.1.0.3  
255.255.255.255  
255.255.255.255  
255.255.255.255  
255.255.255.255  
255.255.255.255  
255.255.255.255  
255.255.255.255  
10.1.4.1  
10.1.1.240  
10.1.0.239  
10.1.1.1  
6 To exit the remoteCli application, enter  
exit  
For information on how to program trusted endpoints on the VCX, see  
the 3Com VCX Administration Guide.  
Test E-Mail Run the following test to ensure that the e-mail setup works correctly.  
Notification Setup  
1 Log in to the server as root.  
2 At the prompt, enter:  
/usr/sbin/sendmail [email protected]  
Subject: test e-mail  
[blank line]  
test1  
test1  
test1  
3 Ctrl-D  
Be aware that most Mail Transfer Agents (MTAs) require valid To: and  
From: addresses.  
If the user fails to receive the e-mail message, check for errors in  
/opt/logs/vcx-linux/maillog. After resolving the problem, run  
the E-Mail setup again.  
 
   
Upgrade Installation 109  
Upgrade  
Installation  
Software upgrades are completed by running two scripts: install-upgrade  
and vcx-switchversion. The install-upgrade script upgrades the VCX Linux  
operating system to the latest version (if necessary) and installs the  
software packages. The vcx-switchversion script provisions the system  
with the software packages.  
It is possible to upgrade from Apps 2.0 to Apps 3.0 provided that the  
server is designated as either an all-in-one or primary server.  
Distributed For a distributed implementation with two or more servers, follow these  
Implementation guidelines when upgrading the system software:  
Upgrade Guidelines  
1 Run the same version of the install-upgrade script on all servers.  
2 From the Servers Monitor screen, stop all processes on all servers.  
The db_watchdog process must be stopped manually. To do this, open a  
command window on the primary server and enter ps -ef | grep  
db_watchdog. The process ID displays. Next, enter kill <process ID>.  
3 Ensure that the server that originally hosted the master database is  
currently hosting the master database:  
n
On the original master server, open cinema_conf. If this file points to  
localhost, then the server is still the master. Otherwise, do the  
following:  
a On the original slave server, go to /opt/3Com/VCX/presconf and type  
./scripts/make_slave.sh.  
b On the original master server, go to /opt/3Com/VCX/presconf and type  
./scripts/make_master.tcl.  
4 Run the switchversion script, first on the master server, then on all other  
servers.  
Sample To run the install-upgrade script:  
install-upgrade Script  
1 Untar the software files and add them to a directory on the server.  
2 Log in to the server as root.  
3 Enter a password (default is pvadmin).  
4 Go to the directory where the software files are located.  
5 Press Enter (or Return).  
 
         
110  
CHAPTER 2: INSTALLATION SCRIPTS  
-bash-2.05b# ./install-upgrade  
Enter ./install-upgrade at the command prompt.  
Start of install-upgrade Script  
---------------------------------------------------------------------------  
-------------------------- VCX Upgrade Installer --------------------------  
---------------------------------------------------------------------------  
------------------------- Pre-Installation Checks -------------------------  
Checking that required files are present...  
Checking which packages are needed...  
3ComInstall-1.1-1.noarch.rpm  
vcx-firewall-1.5.5-1.noarch.rpm  
mysql-3.23.58-1.i386.rpm  
: already present  
: needed  
: already present  
: needed  
presconf-2.5.13-1.i386.rpm  
presconf-conf-2.5.13-1.i386.rpm  
presconf-presence-2.5.13-1.i386.rpm  
presconf-vcxdb-2.5.13-1.i386.rpm  
presconf-web-2.5.13-1.i386.rpm  
oem-a-7.0.1-2.i386.rpm  
: needed  
: needed  
: needed  
: needed  
: needed  
Checking for available disk space...  
Determining required space: ....... Done.  
Required space :  
Available space :  
33581 K  
59679580 K  
There is sufficient disk space.  
----------------------------- OS Installation -----------------------------  
OS file to install : vcx-linux-4.4.0-111505.000  
Target OS partition : 'A', device /dev/sda2  
Replacing version : 3.2.4  
Continue with OS installation? [yes] :  
Installing partition image on /dev/sda2.  
partimage: status: initializing the operation  
partimage: status: reading partition informations  
partimage: status: copying used data blocks  
partimage: status: commiting buffer cache to disk.  
/dev/sda2: 39554/251392 files (0.1% non-contiguous), 117820/502023 blocks  
resize2fs 1.32 (09-Nov-2002)  
The filesystem on /dev/sda2 is now 526128 blocks long.  
tune2fs 1.32 (09-Nov-2002)  
 
Upgrade Installation 111  
Setting maximal mount count to -1  
Setting interval between check 15552000 seconds  
Updating fstab files.  
Configuring GRUB boot loader...Done.  
Transferring configuration data.  
Checking kernel configuration:  
...Selecting standard kernel  
Done.  
Copying configuration files:  
hosts  
passwd  
group  
resolv.conf  
ntp.conf  
modules.conf  
sysconfig/network  
sysconfig/hwconf  
sysconfig/network-scripts/ifcfg-eth0  
sysconfig/network-scripts/ifcfg-eth1  
.vcx-config-network  
ssmtp/revaliases  
ssmtp/ssmtp.conf  
ssh/ssh_config  
ssh/sshd_config  
ssh/ssh_host_key  
ssh/ssh_host_key.pub  
ssh/ssh_host_dsa_key  
ssh/ssh_host_dsa_key.pub  
ssh/ssh_host_rsa_key  
ssh/ssh_host_rsa_key.pub  
httpd/conf/ssl.key/server.key  
httpd/conf/ssl.crt/server.crt  
Done.  
Copying user specific SSH files:  
/root/.ssh  
Done.  
Setting console speed to 9600: Done.  
Configuring timezone: Done.  
Transferring cron entries:  
Done.  
Migrating CUPS configuration: Done.  
Updating /usr/sbin/vcx-switchversion: Done.  
Updating /usr/sbin/vcx-showmachineid: Done.  
Updating /usr/sbin/vcx-licensequery: Done.  
Updating /usr/sbin/vcx-licenseinstall: Done.  
Updating /usr/sbin/vcx-updatecfg: Done.  
 
112  
CHAPTER 2: INSTALLATION SCRIPTS  
Updating /usr/sbin/vcx-createcfg: Done.  
Configuration transfer completed successfully.  
-------------------------- Package Installation ---------------------------  
Installing 7 packages...  
vcx-firewall-1.5.5-1.noarch.rpm  
presconf-2.5.13-1.i386.rpm  
: OK  
: OK  
: OK  
: OK  
: OK  
: OK  
: OK  
presconf-conf-2.5.13-1.i386.rpm  
presconf-presence-2.5.13-1.i386.rpm  
presconf-vcxdb-2.5.13-1.i386.rpm  
presconf-web-2.5.13-1.i386.rpm  
oem-a-7.0.1-2.i386.rpm  
7 packages installed.  
----------------------------- Final Assembly ------------------------------  
Installing assembly package...  
vcx-assembly-APPS-2.9.13-1.i386.rpm  
Assembly package installed.  
: OK  
------------------- Installation Completed Successfully -------------------  
------------------- VCX version 2.9.13 is now available -------------------  
End of install-upgrade Script  
Record the VCX version number that appears at the end of the  
install-upgrade script. You will need it to run the next script (the system  
provisioning script).  
Sample Run the switchversion script after completing the install-upgrade script  
vcx-switchversion for a software upgrade. This script provisions the system with the latest  
Script software application packages.  
The vcx-switchversion script takes the system out of service for several  
minutes. Accordingly, run the script during a period of low system activity.  
To run the switchversion script:  
1 Log in to the server as root.  
2 Enter a password (default is pvadmin).  
3 Go to the directory where the software files are located.  
4 Press Enter (or Return).  
 
   
Managing the Activation Keys 113  
-bash-2.05b# vcx-switchversion 2.9.3  
Enter vcx-switchversion <version-number> at the command prompt.  
For <version-number>, enter the VCX version number that appeared at  
the end of the install-upgrade script.  
Start of vcx-switchversion Script  
-bash-2.05b# vcx-switchversion 2.9.13  
Checking if VCX can switch to VCX.2.9.13  
ls: /opt/3com/VCX.2.9.13/scripts/upgrade/C??*: No such file or directory  
Checking os versions: YES  
Switching VCX to VCX.2.9.13:  
...setting up  
...checking if this is a VCX 5.X upgrade: no  
...checking if existing configuration file is valid for new version.  
...copying existing configuration file.  
...selecting operating system partition  
The currently active OS is 'B', OS version 3.3.1  
Selecting OS installation 'A', OS version 4.4.0  
Configuring GRUB boot loader...Done.  
Version switch complete. Rebooting to start new version.  
Broadcast message from root (pts/0) (Tue Dec 20 11:21:43 2005):  
The system is going down for reboot NOW!  
End of vcx-switchversion Script  
If upgrading from release 2.0 to release 3.0, you will be required to add  
new activation keys (license keys).  
Managing the  
Activation Keys  
If you have purchased new applications, or need to increase the number  
of users on your system, then you may need to upgrade your activation  
keys (license keys). Each system has a unique system host ID that is used  
in the generation of activation keys.  
Before upgrading the activation keys, first ensure that the VCX Linux  
operating system and the 3Com IP Conferencing Module software is  
installed. Then do the following:  
1 Using a browser, log in to the 3Com IP Conferencing Module as root.  
2 Select Admin > System Config from the menu bar.  
 
   
114  
CHAPTER 2: INSTALLATION SCRIPTS  
3 From quick links, select Licensing Information.  
The License Information screen appears, listing the systems activation  
keys and host ID.  
Figure 4 License Information  
4 To delete an activation key, press  
5 To add an activation key:  
.
a Send the host ID (located at the bottom of the screen) to 3Com.  
b When 3Com returns the new activation key, paste it into the license  
string box and press Add.  
You can also determine the system host ID with a Linux command:  
1 Log in to the server as root.  
2 At the prompt, enter cd /opt/3com/VCX/presconf/tools/license  
3 Enter ./hostid  
The Host ID is displayed. For example: 3157ecf668ffcb7dc7f00e4c  
Please note that the ./hostid command you enter in the license directory  
is not the same as the hostid command normally used with Linux  
(/usr/bin/hostid).  
 
OBTAINING SUPPORT FOR YOUR  
PRODUCT  
3
Register Your  
Product  
Warranty and other service benefits start from the date of purchase, so it  
is important to register your product quickly to ensure you get full use of  
the warranty and other service benefits available to you.  
Warranty and other service benefits are enabled through product  
registration. Register your product at http://eSupport.3com.com/.  
3Com eSupport services are based on accounts that you create or have  
authorization to access. First time users must apply for a user name and  
password that provides access to a number of eSupport features  
including Product Registration, Repair Services, and Service Request. If  
you have trouble registering your product, please contact 3Com Global  
Services for assistance.  
Purchase  
Value-Added  
Services  
To enhance response times or extend warranty benefits, contact 3Com or  
your authorized 3Com reseller. Value-added services like 3Com ExpressSM  
and GuardianSM can include 24x7 telephone technical support, software  
upgrades, onsite assistance or advance hardware replacement.  
Experienced engineers are available to manage your installation with  
minimal disruption to your network. Expert assessment and  
implementation services are offered to fill resource gaps and ensure the  
success of your networking projects. More information on 3Com  
maintenance and Professional Services is available at  
http://www.3com.com/  
Contact your authorized 3Com reseller or 3Com for a complete list of the  
value-added services available in your area.  
 
       
116  
APPENDIX 3: OBTAINING SUPPORT FOR YOUR PRODUCT  
Troubleshoot  
Online  
You will find support tools posted on the 3Com web site at  
http://www.3com.com/  
3Com Knowledgebase helps you troubleshoot 3Com products. This  
query-based interactive tool is located at  
http://knowledgebase.3com.com and contains thousands of technical  
solutions written by 3Com support engineers.  
Access Software  
Downloads  
Software Updates are the bug fix / maintenance releases for the version  
of software initially purchased with the product. In order to access these  
Software Updates you must first register your product on the 3Com web  
site at http://eSupport.3com.com/  
First time users will need to apply for a user name and password. A link to  
software downloads can be found at http://eSupport.3com.com/, or  
under the Product Support heading at http://www.3com.com/  
Software Upgrades are the software releases that follow the software  
version included with your original product. In order to access upgrades  
and related documentation you must first purchase a service contract  
from 3Com or your reseller.  
Telephone Technical To enable telephone support and other service benefits, you must first  
Support and Repair  
register your product at http://eSupport.3com.com/  
Warranty and other service benefits start from the date of purchase, so it  
is important to register your product quickly to ensure you get full use of  
the warranty and other service benefits available to you.  
When you contact 3Com for assistance, please have the following  
information ready:  
n
n
n
n
n
Product model name, part number, and serial number  
Proof of purchase, if you have not pre-registered your product  
A list of system hardware and software, including revision level  
Diagnostic error messages  
Details about recent configuration changes, if applicable  
 
     
Contact Us 117  
To send a product directly to 3Com for repair, you must first obtain a  
return authorization number (RMA). Products sent to 3Com, without  
authorization numbers clearly marked on the outside of the package, will  
be returned to the sender unopened, at the senders expense. If your  
product is registered and under warranty, you can obtain an RMA  
number online at http://eSupport.3com.com/. First time users will  
need to apply for a user name and password.  
Contact Us  
3Com offers telephone, e-mail and internet access to technical support  
and repair services. To access these services for your region, use the  
appropriate telephone number, URL or e-mail address from the list below.  
Telephone numbers are correct at the time of publication. Find a current  
directory of contact information posted on the 3Com web site at  
http://csoweb4.3com.com/contactus/  
Country  
Telephone Number  
Country  
Telephone Number  
Asia, Pacific Rim Telephone Technical Support and Repair  
Australia  
Hong Kong  
India  
1 800 678 515  
800 933 486  
+61 2 9424 5179 or  
000800 650 1111  
001 803 61009  
00531 616 439 or  
03 3507 5984  
Philippines  
1235 61 266 2602 or  
1800 1 888 9469  
800 810 3033  
800 6161 463  
080 333 3308  
00801 611 261  
001 800 611 2000  
P.R. of China  
Singapore  
S. Korea  
Taiwan  
Thailand  
Indonesia  
Japan  
Malaysia  
New Zealand  
Pakistan  
1800 801 777  
0800 446 398  
+61 2 9937 5083  
You can also obtain support in this region using the following e-mail: [email protected]  
Or request a repair authorization number (RMA) by fax using this number:  
+ 65 543 6348  
Europe, Middle East, and Africa Telephone Technical Support and Repair  
From anywhere in these  
regions, call:  
+44 (0)1442 435529  
From the following countries, you may use the numbers shown:  
 
 
118  
APPENDIX 3: OBTAINING SUPPORT FOR YOUR PRODUCT  
Country  
Telephone Number  
Country  
Telephone Number  
Austria  
Belgium  
01 7956 7124  
070 700 770  
7010 7289  
01080 2783  
0825 809 622  
01805 404 747  
06800 12813  
1407 3387  
1800 945 3794  
199 161346  
Luxembourg  
Netherlands  
Norway  
342 0808128  
0900 777 7737  
815 33 047  
00800 441 1357  
707 200 123  
0800 995 014  
9 021 60455  
07711 14453  
08488 50112  
0870 909 3266  
Denmark  
Finland  
France  
Germany  
Hungary  
Ireland  
Israel  
Poland  
Portugal  
South Africa  
Spain  
Sweden  
Switzerland  
U.K.  
Italy  
You can also obtain support in this region using the following URL:  
http://emea.3com.com/support/email.html  
Latin America Telephone Technical Support and Repair  
Antigua  
Argentina  
Aruba  
Bahamas  
Barbados  
Belize  
Bermuda  
Bonaire  
Brazil  
Cayman  
Chile  
Colombia  
Costa Rica  
Curacao  
Ecuador  
Dominican Republic  
1 800 988 2112  
0 810 444 3COM  
1 800 998 2112  
1 800 998 2112  
1 800 998 2112  
52 5 201 0010  
1 800 998 2112  
1 800 998 2112  
0800 13 3COM  
Guatemala  
Haiti  
Honduras  
Jamaica  
Martinique  
Mexico  
Nicaragua  
Panama  
Paraguay  
Peru  
Puerto Rico  
Salvador  
Trinidad and Tobago  
Uruguay  
Venezuela  
Virgin Islands  
AT&T +800 998 2112  
57 1 657 0888  
AT&T +800 998 2112  
1 800 998 2112  
571 657 0888  
01 800 849CARE  
AT&T +800 998 2112  
AT&T +800 998 2112  
54 11 4894 1888  
AT&T +800 998 2112  
1 800 998 2112  
AT&T +800 998 2112  
1 800 998 2112  
AT&T +800 998 2112  
AT&T +800 998 2112  
57 1 657 0888  
1 800 998 2112  
AT&T +800 998 2112  
AT&T +800 998 2112  
AT&T +800 998 2112  
1 800 998 2112  
AT&T +800 998 2112  
AT&T +800 998 2112  
You can also obtain support in this region using the following:  
Spanish speakers, enter the URL:  
http://lat.3com.com/lat/support/form.html  
Portuguese speakers, enter the URL:  
http://lat.3com.com/br/support/form.html  
English speakers in Latin America should send e-mail to:  
US and Canada Telephone Technical Support and Repair  
1 800 876 3266  
 
INDEX  
I
A
initial installation  
activation key, managing 113  
C
conference server 18  
conference server database 18  
configuration options  
network configuration 18  
system configuration 18  
single server installation 22  
install-upgrade script, overview 109  
interactive voice response system 18  
IP Conferencing Module configuration 19  
single server 9  
D
dual server installation  
database configuration 46, 61  
e-mail configuration 44, 59  
IP Conferencing Module 46, 61  
setup script (primary server) 38  
setup script (secondary server) 53  
system configuration 42, 57  
L
M
e-mail configuration 71, 85, 97  
IP Conferencing Module 73, 88, 100  
network configuration 66, 80, 92  
setup script (primary server) 65  
setup script (secondary server) 80  
system configuration 69, 83, 95  
E
G
requirements 13  
worksheet 15  
N
general installation guidelines 19  
network configuration 18  
H
O
overview  
Host ID 113  
system components 17  
 
 
120  
P
overview 104  
set up conference attendant routes 105  
set up conference routes 104  
test e-mail setup 108  
presence server 18  
presence server database 18  
S
scripts  
database configuration 30  
system components  
conference server database 18  
overview 17  
presence server 18  
presence server database 18  
U
overview 109  
vcx-switchversion script 112  
V
VCX database 18  
vcx-switchversion script, overview 112  
W
web provisioning server 18  
 

Airlink101 Network Card ANAS250 User Manual
All Clad Slow Cooker 99009 User Manual
Allied Telesis Network Hardware AT PC232 POE User Manual
American Audio Music Mixer CommanderPlus User Manual
American DJ Musical Instrument Mini Gressor II User Manual
American Standard Furnace 32 5037 01 User Manual
Atlona Car Amplifier AT VGA12 User Manual
Axor Plumbing Product 16532001 User Manual
Banner Stereo Amplifier MA3 User Manual
BC Speakers Speaker 12HPL64 User Manual